Product Description
Chrysler 200 2011-2014 & Sebring 2007-2010 Rocker Trim, 1.25", 2 Pieces (TH47780)
TH47780 covers two Chrysler sedans with one rocker kit: the Chrysler 200 from 2011 to 2014 and the Chrysler Sebring from 2007 to 2010, both four-door. It's two polished stainless steel pieces, 1.25" wide, that install below the door.
Which nameplate do you have?
- Chrysler Sebring, 2007-2010.
- Chrysler 200, 2011-2014.
The title gives the Sebring years beside the 200's, as the fitment does. A Sebring from outside those years isn't listed here.
Two pieces
Two pieces on a four-door sedan. The record doesn't say how far each strip runs or how they're placed. The product photos show the shape; if they don't make it clear, call 877-752-3811 before ordering.
A narrow rocker strip
One and a quarter inches is a slim band. Decide where on the rocker face you want it, mark that with painter's tape, and check from both corners of the car. The record doesn't specify the exact position on the rocker.
Linked accessories
Pillar post kits PP47780 (four pieces), PP47781 (six), PP47782 (eight) and PP47783 (ten; its note says "Must remove "200" logo prior to install"), plus WQ47780, a six-piece wheel well accent trim. That note belongs to the pillar kit; this rocker record has no such requirement.
Material
The two 1.25" Chrysler 200 and Sebring strips go below the doors; QAA cuts them in the USA from polished 26 gauge 304 stainless and secures them with 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime without harming the sedan.
Prep
Brush the rockers with soapy water, rinse, dry fully, and wipe with isopropyl alcohol along the full length.
Installing a long, thin piece
Run a guide line of painter's tape at the height you want. Hold the piece against it, peel a short section of liner at the front, set it, and walk backward along the side pressing the steel down as the liner comes out. A helper holding the far end makes this much easier. Finish with firm pressure.
Height and end positions
Keep height and end positions consistent.
After
Check door clearance; wash after a day.
Care
Mild soap, a soft cloth.
Conditions
Dry, mild weather or a garage for the 200 or Sebring.
What to send if you call
Nameplate, year, and a photo of the car.
Before ordering
Check the badge and year against the two ranges above, then look at the rocker under the doors. It should be clean, undamaged and free of skirts or guards, with room for a strip an inch and a quarter tall. If your sedan has been repainted or repaired along the rocker, mention it when you call.
Rocker edge
Sight along the bottom of each rocker from the ends. Touch up chips or curb scrapes first, since a narrow polished line draws the eye to anything next to it.
Preview with tape
A strip of painter's tape where the steel will go shows the finished look before you order. Leave it on for a day and see whether you like the position.
200/Sebring kit TH47780, UPC 691821513192: 877-752-3811, Quality Automotive Trims.
TH47780 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH47780 |
| UPC | 691821513192 |
| Part type | Rocker Panel Trim, On the rocker |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.25" |
| Coverage / notes | Installs below the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2011-2014 Chrysler 200 and 2007-2010 Chrysler Sebring |
Fitment: TH47780
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler 200 | 2011-2014 | 4-door, Sedan |
| Chrysler Sebring | 2007-2010 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chrysler 200
- PP47780: 4-piece Pillar Post Trim
- PP47781: 6-piece Pillar Post Trim
- PP47782: 8-piece Pillar Post Trim
- PP47783: 10-piece Pillar Post Trim
- WQ47780: 6-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, On the rocker
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH47780 Rocker Panel Trim, On the rocker
What does TH47780 fit?
The Chrysler 200 2011-2014 and Chrysler Sebring 2007-2010, four-door sedans.
Does it fit my Sebring?
Yes, if it's a 2007-2010 sedan.
How many pieces?
Two. Check the photos or call 877-752-3811 about the layout.
Where does it go?
On the rocker below the door, 1.25" wide.
