Product Description
Chevy Tahoe 2021-2026 Tapered Stainless Molding Insert Kit, 1.75 to 1.9 Inch (MI61190)
MI61190 is a four-piece molding insert kit for the Chevrolet Tahoe 4-door SUV, and both the title and the fitment row run from 2021 through 2026. That is a single row with no trim exclusions. If your Tahoe is outside those years, call Quality Automotive Trims at 877-752-3811 with MI61190 to confirm before ordering.
A gentle taper
The note gives the width as "1.75"-1.9" Tapered Width," so each strip widens slightly along its length, from 1.75 inches to 1.9 inches. The width field shows only the larger figure, 1.90. The catalog doesn't say which end faces forward, so study the photos and mark each strip's orientation before starting. The photos show placement and direction.
Measuring your moldings
These are fairly wide strips. Measure the flat face of a molding near each end with a ruler and compare the readings with 1.75 and 1.9 inches. If the face is narrower, or the molding profile looks different from the photos, call before ordering.
Material and mounting
Polished 304 stainless steel, 26 gauge, made in the USA. The strips mount with 3M automotive-grade acrylic foam tape and install directly over the existing surface; no drilling. Tahoe fit questions are handled at 877-752-3811; quote MI61190 and have your model year and the photos open when you call.
Fitting
Check the moldings for cracks, lifting ends or old adhesive and fix those first. Wash, dry and wipe with rubbing alcohol. On each liner, write the position and an arrow toward the 1.9 inch end. Dry-fit each strip with its liner on and confirm the taper follows the molding. Mark both ends with painter's tape, then peel and press firmly from end to end. Step back after every strip to check the line. The Installation tab lists the temperature range.
Linked Tahoe parts
Four other parts share the SUV tag. BP61190 is a 2-piece large rear body pillar post. TH61190 is a 4-piece rocker panel upper kit at 3.75 running from the bottom of the molding down to the stated width; if it's in your plans, view both sets of photos together. Two window trim packages are listed: WP61190, 22 pieces including window trim and pillar posts, less the large body post BP61190; and WP61191, 10 pieces of window trim only, no pillar posts. Each has its own listing and photos.
Model years
Six model years, 2021 through 2026, are on the row, and a 2026 Tahoe is included. If you are not sure of your SUV's model year, check the registration before you order. It is the one detail this listing turns on, because there is only the one row and one body tag.
Molding condition
The strips go on top of the existing moldings, so any molding that's cracked, loose, or replaced with one that looks different from the photos should be dealt with before ordering.
Care
Mild soap, water and a soft cloth keep the polished face clean. Avoid steel wool and abrasive pads. Questions? 877-752-3811.
MI61190 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI61190 |
| UPC | 691821600229 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.90" |
| Coverage / notes | 1.75"-1.9" Tapered Width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2021-2026 Chevrolet Tahoe |
Fitment: MI61190
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Tahoe | 2021-2026 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2021-2026 Chevrolet Tahoe
- BP61190: 2-piece Body Pillar Post
- TH61190: 4-piece Rocker Panel Trim, Upper Kit
- WP61190: 22-piece Window Trim Package
- WP61191: 10-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI61190 Body Molding Insert Trim Kit
Does MI61190 fit a 2026 Tahoe?
The row and the title list 2021-2026, so yes. If you're unsure about your model, ring 877-752-3811.
How wide are the strips?
They taper from 1.75 inches to 1.9 inches, per the note.
How many pieces?
Four.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What's the material?
Polished 304 stainless steel, 26 gauge, made in the USA.
