Product Description
Chrome ABS License Bar with Logo Cut Out for 2007-2014 Suburban and Tahoe (LBP47196)
If you want a bright accent above the rear plate of a Chevrolet Suburban or Tahoe while keeping the logo in view, LBP47196 is the version with an opening for it. The catalog note reads With Logo Cut Out. It's a one-piece License Bar, Above plate accent Trim, made of chrome plated ABS plastic, polished and imported.
The two chrome versions
QAA lists two chrome bars for these SUVs. LBP47195 is noted Full Face and lists no opening. This one, LBP47196, has the logo cut out. That's the only listed difference. To choose, look at the area above your plate: if the logo sits where the bar goes and you want it visible, this is the version built around it. Compare both listings' photos to be sure, or call Quality Automotive Trims at 877-752-3811 and mention LBP47196.
Fitment rows
Two rows, identical in years and body: Chevrolet Suburban 4-door SUV, 2007-2014, and Chevrolet Tahoe 4-door SUV, 2007-2014. Eight model years for each. Start by checking your model year against that range. Other related models aren't on this listing, so call before ordering if yours reads differently.
About the material
This is chrome plated ABS, a molded plastic part with a chrome layer over it, which the catalog describes as High Quality Chrome Plated ABS Plastic, imported. It's a different material from QAA's polished stainless parts, so if you're mixing bright trim on the same vehicle, check each listing's material line first.
Mounting
It mounts with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. The listing has no note about installing over the existing surface, so go through the photos and the Installation tab first, and call if anything is unclear. No width is listed.
Lining up the logo
The cutout is your guide. Clean the area with soap and water, dry it, and wipe with rubbing alcohol, paying attention to the edges of the logo, where wax collects. Hold the bar in place and move it until the logo sits evenly inside the opening. Check from behind the vehicle that it's level. Mark both ends with painter's tape, align, and press firmly along the length and around the cutout. Press again after a minute. Close the liftgate gently for the first day.
Logo still there?
The cutout assumes the logo is in its original place. If it has been removed or replaced, the opening will frame bare paint. In that case, LBP47195 may suit better; call us to talk it through.
Paint condition
On an SUV from these years, look at the paint above the plate for chips, worn clear coat or old badge adhesive. The tape bonds best to clean, sound paint, so clear residue and fix flaking finish before you begin.
Care for chrome
Mild soap, water and a soft microfiber towel. No abrasive pads, metal polish or harsh chemicals on chrome plating.
LBP47196 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LBP47196 |
| UPC | 691821270286 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Chrome Plated ABS plastic |
| Finish | Chrome plated |
| Coverage / notes | With Logo Cut Out |
| Mounting | 3M automotive-grade acrylic foam tape |
| Origin | Imported |
| Fits | 2007-2014 Chevrolet Suburban and 2007-2014 Chevrolet Tahoe |
Fitment: LBP47196
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Suburban | 2007-2014 | 4-door, SUV |
| Chevrolet Tahoe | 2007-2014 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet Suburban
- LBP47195: 1-piece License Bar, Above plate accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LBP47196 License Bar, Above plate accent Trim
How is LBP47196 different from LBP47195?
LBP47196 has a logo cut out; LBP47195 is noted Full Face.
Is it stainless steel?
No. It's chrome plated ABS plastic, imported.
Which vehicles does it fit?
2007-2014 Chevrolet Suburban and Tahoe, 4-door SUV.
How does it attach?
3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One. Call 877-752-3811 with questions.
