Product Description
Universal Chrome Port Hole Bezels, Truck Style, 2 Pieces (PH4700T)
PH4700T isn't tied to one vehicle. It's a pair of chrome port hole bezels listed as universal: the fitment field reads "Fits ALL," and the title says "Fits N/A Universal Portholes." The only note on the part is "Truck Style." Because there's no make, model or year to check, the decision comes down to whether the shape and size shown in the product photos suit the port holes on your vehicle.
What the listing states
- Two pieces
- Part type: Port Hole Bezel
- Chrome plated ABS plastic with a polished finish, imported
- Note: "Truck Style"
- Mounting: 3M automotive-grade acrylic foam tape
- Fitment: universal, "Fits ALL"
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What it doesn't state
There's no diameter, width or other dimension in the record, and the note "Truck Style" isn't explained. We won't guess at either. Universal fitment means the part isn't restricted to a particular vehicle in our catalog; it doesn't mean every port hole is the same size. So before ordering, compare the photos with your port holes closely, and if you can measure the openings on your vehicle, call Quality Automotive Trims at 877-752-3811 with those measurements and PH4700T. We'll check them against the part.
Chrome plated ABS versus stainless
This part is chrome plated ABS plastic, not stainless steel. That matters for care: plated chrome has a thin bright layer over the plastic, so treat it gently. Wash with mild soap and water, dry with a soft cloth, and never use abrasive pads, steel wool, or polishing compound on it.
Preparing the surface
Clean the area around each port hole with soapy water and dry it well. Wipe with rubbing alcohol and let it flash off. Remove any wax, sealant or coating from the spot where the tape will touch. If the paint there is chipped or flaking, repair it first.
Installing the pair
Hold each bezel in position by hand first. Look at it straight on and check that it sits evenly around the port hole. When it's right, mark a few reference points around the outside with painter's tape. Align the bezel to the marks, and press firmly around its whole edge. Fit the second bezel the same way, then step back and compare the two. The listing doesn't describe how the bezels seat beyond the 3M tape, so if anything about the fit looks off in the dry fit, stop and call before mounting. Install on a dry day within the temperature range in the Installation tab.
A measuring tip
To measure a port hole, lay a straight ruler across the opening at its widest point and note the number, then measure again at a right angle to the first line. Two numbers tell us far more than one. A clear photo taken straight on, with the ruler in the shot, helps when you call.
Why a pair
The set includes two bezels. If your vehicle has a different number of port holes, ask us about ordering more than one set.
PH4700T specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PH4700T |
| UPC | 691821495504 |
| Part type | Port Hole Bezel |
| Pieces in kit | 2 |
| Material | Chrome Plated ABS plastic |
| Finish | Chrome plated |
| Coverage / notes | Truck Style |
| Mounting | 3M automotive-grade acrylic foam tape |
| Origin | Imported |
| Fits | Universal Portholes N/A |
Fitment: PH4700T
| Vehicle | Years | Body style |
|---|---|---|
| Universal Portholes N/A | Fits ALL |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Port Hole Bezel
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PH4700T Port Hole Bezel
What vehicles does PH4700T fit?
It's listed as universal ("Fits ALL"). Compare the photos with your port holes or call 877-752-3811 with measurements.
What does "Truck Style" mean?
The listing doesn't explain it. The photos show the shape.
What is it made of?
Chrome plated ABS plastic with a polished finish, imported.
How does it mount?
With 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many bezels are included?
Two.
