Product Description
Chevrolet Silverado Regular / Extended Cab 2007-2013 Stainless Door Sill Trim, 2 Pieces (DS47185)
DS47185 is a two-piece polished stainless door sill set for the 2007-2013 Chevrolet Silverado, listed for the Regular Cab and the Extended Cab. Both Silverado sill pieces are 26 gauge 304 stainless, made in the USA. Its tape is 3M automotive-grade acrylic foam, applied to the plate's underside.
How the fitment reads
The single row combines tags: Chevrolet Silverado, 2007-2013, 2-door, 3-door, Pickup Truck, Regular Cab, Extended Cab. The catalog doesn't spell out how the two plates relate to an Extended Cab's door openings, so check the photos to see the plate shapes and call before ordering if you have an Extended Cab and want to confirm what's covered. The Fitment tab shows the row as entered.
Size
No width or length is listed. Compare the photos with your sills.
Other listings for these trucks
- PP47181, a two-piece pillar post trim for the 2-door Regular Cab.
- RT47181, a one-piece tailgate accent at a width of 1.
- WZ47181, a four-piece wheel well fender trim molding at 1.75 for the 1500.
- WZ47184 and WZ47184-AP, four-piece wheel well fender trim moldings at 1.75 for the 2500HD and 3500HD.
The fender trim listings are split by truck model, so pick by whether yours is a 1500 or a heavy-duty.
Polished 304 stainless
The sheet is 26 gauge, and the shine is polished metal, not a plated layer.
Mounting
On the 2007-2013 Silverado, both plates fit over the existing sill surface without drilling. According to QAA, the tape will hold for a lifetime with no harm to the Silverado's surface.
What sill trim is
The sill is the threshold at the bottom of the door opening, the step into the cab. A sill plate covers it with polished steel.
Prep
Sills on a pickup take dirt from boots every day. Vacuum out the grit, then wash, rinse and degrease. Remove any dressing and confirm the paint is firmly attached. Dry completely.
Install
- Open the first door and dry-fit the plate with the liner on.
- Center it and mark the ends with painter's tape.
- Peel, align, and press firmly the full length.
- Press again after a minute.
- Repeat with the next plate and compare.
The Installation tab has full prep.
Why sill plates
Every time you climb in, the sill is right at your feet. A polished plate makes the opening look clean, and it lies flat so the door closes normally.
Checklist
Confirm a 2007-2013 Silverado, confirm your cab, check the photos, and inspect the paint.
Doing more than the sills
If pillar, tailgate or fender trim is planned too, each of those listings goes on independently. The sills can come first and the rest later. Just match each one to your cab and truck model, since their fitment tags differ from this listing's.
After
Stay off the sills for the rest of the day, and pick mild, dry weather for the install.
Care
Mild soap and a soft towel.
Questions
Call Quality Automotive Trims at 877-752-3811 and mention DS47185. UPC is on the Specs tab.
DS47185 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DS47185 |
| UPC | 641606026386 |
| Part type | Door Sill trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2013 Chevrolet Silverado |
Fitment: DS47185
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Silverado | 2007-2013 | 2-door, 3-door, Pickup Truck, Regular Cab, Extended Cab |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2013 Chevrolet Silverado
- PP47181: 2-piece Pillar Post Trim
- RT47181: 1-piece Tailgate Accent Trim
- WZ47181: 4-piece Wheel Well Fender Trim Molding
- WZ47184: 4-piece Wheel Well Fender Trim Molding
- WZ47184-AP: 4-piece Wheel Well Fender Trim Molding
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Door Sill trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DS47185 Door Sill trim
What does DS47185 fit?
The 2007-2013 Chevrolet Silverado, Regular Cab and Extended Cab pickups.
How many pieces?
Two door sill trims.
Does it cover an Extended Cab's rear openings?
The catalog does not say. Check the photos or call 877-752-3811.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
