Product Description
Lincoln Navigator and Ford Expedition 2018-2025 Stainless Gas Door Trim (GC58383)
The title names the 2018-2025 Lincoln Navigator and Ford Expedition. Behind that, the Fitment tab for GC58383 has four rows covering the two SUVs, and their end years don't agree. The Lincoln Navigator is listed for 2018-2024 and again for 2018-2025. The Ford Expedition is listed the same way, 2018-2024 and 2018-2025. All rows are 4-door SUVs.
The repeated rows overlap rather than conflict about the start year: every row begins in 2018. The open question is 2025. Two rows include it, two stop a year short, and the title follows the two longer rows. We've flagged the duplicate rows for cleanup. If your Navigator or Expedition is a 2025, please call before ordering so we can confirm. For 2018 through 2024, every row agrees, so owners of those years can order with confidence once the nameplate and gas door are confirmed.
On the Navigator or Expedition, this is one piece of polished 304 stainless, 26 gauge, made in the USA, that mounts with 3M automotive-grade acrylic foam tape. It is not a replacement cap or a replacement part: the SUV's own gas door must be in place, since the trim overlays its face.
No other parts are cross-listed on this sheet for these SUVs. That reflects this listing only; if you'd like more stainless trim for your Navigator or Expedition, ask when you call.
As for installation, GC58383 goes directly over the existing surface, so there's no drilling, and QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. The paint under the tape is what it holds onto, which makes a careful inspection worthwhile. Look the fuel door over in good light. Clear coat that's lifting or cloudy, chips around the edges, and bubbles should all be repaired before you begin. Also make sure the door latches and sits flush.
The fitting takes a few minutes. Wash the door with soap and water, rinse it, and dry it. Degrease the face, wiping until the cloth is clean. With the door closed and the liner still on the tape, position the trim and adjust it until the border of paint around it looks even from every side; a helper stepping back to check is handy. Mark the position with a few short strips of painter's tape. Now peel the liner, line the trim up with the tape, and set it down in one motion. Press firmly over the whole face, give it a minute, and press again. Open the door slowly to confirm it clears. The Installation tab has every step.
The polished 304 surface is bright and reflective, and 26 gauge sheet keeps it thin. Install on a mild, dry day and let the tape cure overnight. Clean with mild soap and a soft cloth, and wipe away any fuel drips.
For the Navigator fuel door trim, ring Quality Automotive Trims at 877-752-3811 and give GC58383. The Navigator gas door trim's UPC appears in Specs.
GC58383 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC58383 |
| UPC | 691821674015 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2024 Lincoln Navigator, 2018-2024 Ford Expedition, 2018-2025 Lincoln Navigator and 2018-2025 Ford Expedition |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC58383
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln Navigator | 2018-2024 | 4-door, SUV |
| Ford Expedition | 2018-2024 | 4-door, SUV |
| Lincoln Navigator | 2018-2025 | 4-door, SUV |
| Ford Expedition | 2018-2025 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC58383 Gas Door Cover Trim
Is GC58383 a replacement gas door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
Does it fit the Ford Expedition?
Yes. The fitment lists the Ford Expedition as well as the Lincoln Navigator, from 2018.
Does it fit a 2025 model?
Some fitment rows end in 2024 and others in 2025. Please call 877-752-3811 to confirm a 2025.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
