Product Description
Jeep Liberty 2008-2012 Stainless License Plate Bezel (LP48070)
LP48070 is a single polished stainless License Plate Bezel for the Jeep Liberty 4-door SUV, model years 2008 through 2012. Its fitment row has no trim tag at all, which matters on this sheet, because one Liberty part is limited to a single trim. The bezel is made in the USA from 26-gauge 304 stainless steel with a mirror finish, and it frames the plate area.
SPORT only applies to the grill overlay
SGC48070, a one-piece Grill Overlay, is tagged 4-door, SUV, SPORT only. That restriction is on the overlay's listing. LP48070's row lists the Liberty 4-door SUV from 2008 to 2012 with no trim limitation, so the SPORT note doesn't narrow the bezel's fitment. If you're buying both and your Liberty isn't a Sport, call Quality Automotive Trims at 877-752-3811 about the overlay before ordering it.
Logo cut outs on two other parts
LB48070 is a one-piece License Bar, Above plate accent Trim, and MI48070 a four-piece body molding insert kit at 1.5"; both are noted With Logo Cut Out. The bezel's listing carries no notes, so it says nothing either way about openings. Compare the bezel's product photos with the area around your plate, including any lock, handle, emblem or lighting, and call with SKU LP48070 if anything is unclear.
Putting it on
Expect tape, not tools: 3M automotive-grade acrylic foam tape is used, and the bezel goes directly over the existing surface without any holes. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Fix any chipped or lifting paint around the plate, peel away old sticker or frame residue, give the area a soapy wash and a thorough dry, and finish with rubbing alcohol. Line the bezel up while its liner is still on, tape off its position, then commit with firm pressure all the way around. Temperature guidance is on the Installation tab.
Rear and side parts
RD48070 is a one-piece Rear Deck Accent at 1.5". Like the bar, it's cataloged for the back of the SUV, so if you're planning more than one rear piece, compare their photos together and hold them up before installing any. PP48070 and PP48071 are pillar post kits with four and six pieces, and GC48070 is a one-piece gas door cover trim. TH48070 and WS48070 are cross-listed by number only. Check each listing for its finish.
One rear piece at a time
Because it surrounds the plate, the bezel makes a good anchor for the rest of the rear. Put it on first and leave it for a while. From there, fitting the bar or the deck trim one at a time lets you see how each looks beside what's already on the Liberty.
Last checks
A Liberty from 2008 to 2012 is what your records should show. Any plate frame you use belongs in the dry fit too, so you can see whether it sits over the bezel's edge. For cleaning, plain soap and water followed by a soft towel; abrasive pads will mark the mirror face.
LP48070 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP48070 |
| UPC | 691821435593 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2008-2012 Jeep Liberty |
Fitment: LP48070
| Vehicle | Years | Body style |
|---|---|---|
| Jeep Liberty | 2008-2012 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2008-2012 Jeep Liberty
- GC48070: 1-piece Gas Door Cover Trim
- LB48070: 1-piece License Bar, Above plate accent Trim
- MI48070: 4-piece Molding Insert
- PP48070: 4-piece Pillar Post Trim
- PP48071: 6-piece Pillar Post Trim
- RD48070: 1-piece Rear Deck Accent
- SGC48070: 1-piece Grill Overlay
- TH48070: 6-piece Rocker Panel Trim, Insert Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP48070 License Plate Bezel
Does LP48070 fit only the Liberty Sport?
No. The SPORT only tag is on the SGC48070 grill overlay. The bezel's row has no trim restriction.
Which years are covered?
2008 through 2012, Jeep Liberty 4-door SUV.
Does the bezel have a logo cut out?
Its listing doesn't say. The logo cut out notes are on LB48070 and MI48070. Check the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
