Product Description
1998-2000 Chevrolet S-10 Extra Cab Short Bed, No Molding, No Flares: 10-Piece Lower Rocker Kit, 5" (TH38198)
TH38198 fits the 1998-2000 Chevrolet S-10 Extra Cab short bed with no molding and no flares. The record writes the tag as "2-door, 3-door, Pickup Truck Extra Cab, Short Bed, NO Molding, NO Flares." It's ten pieces of polished stainless steel, a Lower Kit 5" tall from the bottom of the door up.
Years: 1998 to 2000
The fitment row ends at 2000. This record isn't linked to any other S-10 kit, and its span is short, so check the year carefully. If your Extra Cab is newer than 2000, this record doesn't list it; call 877-752-3811.
Door count
Both "2-door" and "3-door" appear in the tag, and the record doesn't explain which configurations that covers. Count the doors on your truck and compare with the product photos. If you're unsure, send a side photo with your call.
Plain sides
No molding and no flares are part of the tag. With nothing above the steel to follow, the top line comes from your measurement, not a guide on the truck.
No siblings linked
This record has no linked SKUs, so there's nothing on this page to compare it with. If your Extra Cab has molding or flares, ask us which listing fits instead.
Built from
QAA cuts the ten 1998-2000 S-10 pieces from polished 26 gauge 304 stainless steel in the USA, and they bond over the existing surface with 3M automotive-grade acrylic foam tape. QAA states that tape will hold for a lifetime without harming the truck.
Ten pieces
The data doesn't map pieces to positions. Sort them with the photos and mark each liner.
Set the height
Measure five inches up from the door bottom at both ends of each door and mark with painter's tape. Those marks are your top line.
Install
- Wash, dry and wipe the lower body with isopropyl alcohol.
- Repair any chips or rust at the door bottoms.
- Dry-fit each piece.
- Peel a short length of liner, set it, then press across.
- Firm pressure to finish.
A third door
If your truck has a rear access door, open and close it after its piece is on to check clearance.
Care
Give the tape a day before washing, then mild soap.
Matching
Reuse the first S-10 measurements on every piece.
Supplies
Tape measure, painter's tape, marker, soap, isopropyl alcohol, towels. Pick a dry, mild day.
Before ordering
Check four things: a year from 1998 through 2000, an Extra Cab, a short bed, and sides with neither molding nor flares. If any one of those doesn't match, this kit isn't the one the record names. A side photo and the year from the door sticker are all we need on the phone to point you in the right direction.
Plain-body tip
Sight down the side from the front bumper before pressing each piece. Without molding as a reference, the eye catches a crooked line quickly.
Chevy S-10 1998-2000 buyers can mention TH38198 and UPC 691821522378 at 877-752-3811.
TH38198 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH38198 |
| UPC | 691821522378 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1998-2000 Chevrolet S-10 |
Fitment: TH38198
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet S-10 | 1998-2000 | 2-door, 3-door, Pickup Truck Extra Cab, Short Bed, NO Molding, NO Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH38198 Rocker Panel Trim, Lower Kit
Which S-10 is TH38198 for?
1998-2000 Chevrolet S-10 Extra Cab short bed with no molding and no flares.
Does it fit a newer S-10?
The record ends at 2000. Call 877-752-3811.
How tall?
5", from the door bottom up.
How many pieces?
Ten.
