Product Description
2000-2006 GMC Yukon 4-Door Without Flares: Upper Rocker Kit, 10 Pieces, 4" (TH40295)
TH40295 is the no-flares version of the Yukon Upper Kit. The fitment row reads "GMC Yukon 2000-2006 | 4-door, NO Flares," and the kit is ten pieces of polished stainless steel, 4" wide. Its note says it "Spans from the bottom of the molding DOWN to the specified width," so the top edge starts under the side molding and the steel runs down from there.
Flares or no flares?
One sibling is linked: TH40296, eight pieces, the same 4" width, the same molding-down placement, tagged "4-door, w/ Flares." The flare tag is the only difference the data gives, along with the piece count. Look at your wheel openings. If your Yukon has fender flares, TH40296 is the record that names them. If it doesn't, this one does. When you can't tell, take a photo of a front wheel opening and send it to 877-752-3811.
The molding is your reference
Because the kit hangs from the bottom of the side molding, check that the molding on your truck is present, straight, and firmly attached along each door. The record doesn't say whether any molding comes in the box, and the kit is described as rocker trim only.
Material
For the 2000-2006 Yukon without flares, ten 4" strips of USA-made polished 26 gauge 304 stainless steel go below the molding on 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime with no harm to the GMC SUV.
Test the height
Put a strip of painter's tape along one door with its top touching the bottom of the molding and its bottom four inches down. Step back. That's the band you'll be covering, and it tells you whether it clears the bottom of the door.
Ten pieces
No layout comes with the data. The product photos show the pieces; sort them and label each liner.
Cleaning
Wash, rinse and dry the lower doors and panels, then wipe the band with isopropyl alcohol. Pay attention to the area right under the molding, where grime collects.
Install
- Dry-fit with painter's tape, tops tucked under the molding.
- Peel a few inches of liner from one end.
- Set the top edge against the molding and press along as you peel.
- Go back over the piece with firm pressure.
Afterward
Open each door to check clearance at the bottom. Look along the Yukon for a straight top line tight to the molding. Wait a day before washing so the tape settles.
Before ordering
Confirm three things: your Yukon is a four-door in the 2000-2006 range, it has no fender flares, and you want steel below the molding rather than on the molding itself. If all three are true, this record matches. If one isn't, call 877-752-3811 first.
Door-gap landmarks
Fit a run, then measure where each piece starts and stops relative to the door gaps. Use those figures for the others so the truck looks even from both curbs.
Ten-piece Yukon kit TH40295 carries UPC 691821292806; call Quality Automotive Trims at 877-752-3811.
TH40295 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH40295 |
| UPC | 691821292806 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2000-2006 GMC Yukon |
Fitment: TH40295
| Vehicle | Years | Body style |
|---|---|---|
| GMC Yukon | 2000-2006 | 4-door, NO Flares |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2000-2006 GMC Yukon
- TH40296: 8-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH40295 Rocker Panel Trim, Upper Kit
Does TH40295 fit a Yukon with fender flares?
This record is tagged NO Flares. The linked TH40296 is tagged w/ Flares.
Where does it start?
At the bottom of the side molding, running down 4".
Which years?
GMC Yukon 2000-2006, 4-door.
How many pieces?
Ten.
