Product Description
Lincoln Continental 1995-1997 Full-Length Rocker Trim, 12 Pieces, 5.5"-6" Tapered (TH35611)
TH35611 is a twelve-piece polished stainless steel Full Kit for the 1995-1997 Lincoln Continental 4-door sedan. The width tapers from 5.5" to 6". Two notes describe the coverage: "Full Length, Includes coverage from the wheel well to the bumper on the front and rear," and "Spans from the bottom of the molding to the bottom of the door." No other parts are linked.
Twelve pieces, end to end
Twelve is the count for the whole kit, doors plus the sections running out toward the bumpers. The record doesn't give a layout, so don't assume how they split; the photos are the best guide. Here's a sorting routine that helps with a kit this size:
- Clear a table or lay out a moving blanket.
- Arrange the Continental pieces in two rows by shape, using the photos.
- Within each row, order them front to rear.
- Hold each one up to the car with the liner on to confirm.
- Write side and position on a strip of painter's tape stuck to each liner.
If two pieces look identical or one has no clear home, call 877-752-3811 before going further.
Half an inch of taper
The record gives 5.5" at one end and 6" at the other without saying which is which. Measure from the molding to the bottom of the door and of the end panels at a few points. Readings inside the range fit the record.
Material
The full-length 1995-1997 Continental kit is twelve tapered pieces of USA-made polished 26 gauge 304 stainless steel, carried wheel well to bumper between molding and door bottom on 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without harm to the Lincoln.
Paint from bumper to bumper
Because coverage reaches the bumpers, every inch of the lower side matters, including the stretches beside the wheel openings where chips gather. Inspect, repair and let the paint cure. Then wash, dry, and wipe with isopropyl alcohol, front to rear.
A straight molding line
Run your hand along the molding to feel for any lifted spots. Any section that lifts should be secured before installing, since every one of the twelve pieces hangs from it.
Install sequence
Begin with a front door piece; it's easiest to set the height there. Work rearward, then do the front section, and finish behind the rear wheel. Each piece: dry-fit, peel a few inches, place, press, pull the liner gradually.
Continental end sections
Measure where the Continental end sections start relative to the wheel openings and keep that consistent.
Aftercare
Leave it a day before the first wash; use mild soap, never scouring pads.
Tools for a big kit
A tape measure, a roll of painter's tape and a marker, isopropyl alcohol, plenty of clean cloths, and a plastic trim tool for pressing the edges. With twelve pieces, a second person saves a lot of time holding pieces level while you check the line.
For the twelve-piece Continental kit TH35611 (UPC 691821642502), call 877-752-3811.
TH35611 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH35611 |
| UPC | 691821642502 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5.5" to 6" tapered |
| Coverage / notes | Full Length, Includes coverage from the wheel well to the bumper on the front and rear; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-1997 Lincoln Continental |
Fitment: TH35611
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln Continental | 1995-1997 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH35611 Rocker Panel Trim, Full Kit
Does TH35611 cover past the doors?
Yes. The record says it includes coverage from the wheel well to the bumper on the front and rear.
How tall is it?
Tapered 5.5"-6", from the bottom of the molding to the bottom of the door.
How many pieces?
Twelve.
Which Continental?
1995-1997, 4-door sedan.
