Product Description
GMC Envoy 2002-2006 Side Molding Insert Kit, 1.75", 6 Pieces (TH42293)
TH42293 is an Insert Kit for the side molding on the GMC Envoy four-door SUV, 2002-2006. It's six pieces of polished stainless steel, 1.75" wide, and the record's only placement note is "Side Molding." This is trim for the molding itself, not for the painted door or rocker below it.
Standard Envoy versus XL
Another catalog record is also a six-piece 1.75" Insert Kit for the Envoy, but it's tagged "XL, Extended" with the note "Extended," and its years run later. The two aren't linked. This record's tag reads just "4-door, SUV." If your Envoy is an XL, or you're not sure which body you have, call 877-752-3811 before ordering.
Molding required
Since the steel goes on the molding, your truck needs its side molding present and secure. Missing, cracked or loose sections should be dealt with first.
Measure the molding
The insert is 1.75" wide. Hold a ruler across your molding to see how that compares with its face. If the molding looks narrower than the insert, send a photo before buying.
Material
The six 1.75" 2002-2006 Envoy molding inserts are cut in the USA from polished 26 gauge 304 stainless steel and pressed in with 3M automotive-grade acrylic foam tape over the existing surface. QAA states that tape will hold for a lifetime without harming the GMC SUV.
Clean molding thoroughly
Trim dressings and old wax are the enemy of tape. Wash, rinse, dry, then wipe the molding face with isopropyl alcohol several times, using a fresh cloth each pass, until nothing more comes off.
Six pieces
No layout is in the data. Match the pieces to the product photos and number the liners.
Dry-fit
Tape each piece onto its molding section and check the edges sit evenly. Adjust before peeling.
Apply
Peel a few inches of liner, center the insert on the molding, and press along as the liner comes off. Finish with firm pressure.
After
Open each door to confirm nothing catches at the gaps. Sight along the Envoy. Wait a day to wash.
Keep it clean
Avoid spraying trim dressing on the steel. Mild soap and a soft mitt are enough.
Before ordering
Confirm three things: the truck is a four-door Envoy from 2002-2006, it isn't the XL, and its side molding is intact. If all three are true, this record matches. If you're unsure about any of them, send a side photo to 877-752-3811 and we'll check.
Envoy insert positions
After the first inserts, look at where each ends relative to the door gaps and place the rest the same way, so the truck looks even from either curb.
Conditions
Install in dry weather with mild temperatures, or in a garage. Cold molding and cold tape don't bond as well, so let everything warm up first.
What to send if unsure
Have the year ready, plus a photo of one full side of the Envoy and a close-up of the molding with a ruler held across it.
Tools
Painter's tape, a ruler, isopropyl alcohol and several clean microfiber cloths.
For the six 1.75-inch Envoy pieces, TH42293 (UPC 691821298082), ring 877-752-3811.
TH42293 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH42293 |
| UPC | 691821298082 |
| Part type | Rocker Panel Trim, Insert Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.75" |
| Coverage / notes | Side Molding |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2002-2006 GMC Envoy |
Fitment: TH42293
| Vehicle | Years | Body style |
|---|---|---|
| GMC Envoy | 2002-2006 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Insert Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH42293 Rocker Panel Trim, Insert Kit
What does TH42293 fit?
The side molding on the GMC Envoy four-door SUV, 2002-2006.
Does it fit the Envoy XL?
This record is tagged SUV only. A separate record is tagged XL, Extended; call 877-752-3811 to confirm.
How wide is it?
1.75".
How many pieces?
Six.
