Product Description
1995-1996 Buick Regal Sedan Rocker Trim: 8-Piece Full Kit, 6.25" from Molding to Door Bottom (TH35577)
TH35577 is an eight-piece polished stainless steel Full Kit for the 1995-1996 Buick Regal 4-door sedan. It's 6.25" wide and "Spans from the bottom of the molding to the bottom of the door." This eight-piece kit is for the 1995-1996 Regal sedan, while TH35570 is the coupe kit.
Eight pieces, four doors
Eight divides neatly into two per door, but the record doesn't describe the layout, so call to confirm. Lay them out, match shapes, and number the liners. If something doesn't match your doors, call 877-752-3811 before peeling anything.
The linked coupe kit
TH35570 is tagged for the 2-door Regal coupe of the same years. It's a ten-piece Upper Kit, 3.5", stopping partway down the door. If you own a sedan, it isn't your kit; it's mentioned here only so the two aren't confused.
Full coverage below the molding
As a Full Kit, this one runs all the way from the molding to the door bottom. Measure that distance on your car at the front and rear of each door. Readings near 6.25" agree with the record.
What it's made from
The Regal pieces are USA-made from high-quality polished 304 in 26 gauge.
How it's held
The eight 6.25" Regal pieces go directly over the existing surface with 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime and won't cause any damage to the Buick sedan.
Surface check
Over six inches of polished steel reflects whatever is under it. Look along each lower door in angled light for small dents and ripples, and fix what you can before installing. Then wash, dry, and wipe with isopropyl alcohol until clean.
The molding
Every piece starts at the molding's lower edge. Press along it on all four doors and reattach anything loose.
Working order
- Start with a front door.
- Then the rear door behind it, lining up the ends across the gap.
- Measure each position and keep the rest consistent.
Each piece
Dry-fit with the liner on. Peel a few inches, set the top edge, press, and keep going as the liner comes off. Finish with firm pressure across the whole face.
Door check
Open and close each door after its piece is installed, and look at how the ends meet across the gap between front and rear doors.
What to send when you call
Your year, a note that it's the sedan, your molding-to-door-bottom readings, and a clear photo of the car in profile. We can compare those with the 6.25" figure and the kit photos.
Conditions
Work on a dry, mild day with the car in the shade, so the tape and the panels are at a moderate temperature.
Supplies
You'll want mild soap, isopropyl alcohol, lint-free cloths, a tape measure, painter's tape for labeling and a plastic trim tool.
Care
Wait a day to wash the Regal; mild soap and soft cloths after.
Care for the steel
Skip abrasive pads; they scratch polished steel.
Regal owners with questions can phone Quality Automotive Trims at 877-752-3811 and give SKU TH35577 (UPC 691821611232).
TH35577 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH35577 |
| UPC | 691821611232 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.25" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-1996 Buick Regal |
Fitment: TH35577
| Vehicle | Years | Body style |
|---|---|---|
| Buick Regal | 1995-1996 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1995-1996 Buick Regal
- TH35570: 10-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH35577 Rocker Panel Trim, Full Kit
Does TH35577 fit the Regal coupe?
No. It's tagged 4-door sedan. The coupe kit is TH35570.
How tall is it?
6.25", from the bottom of the molding to the bottom of the door.
How many pieces?
Eight.
Which years?
1995-1996.
