Product Description
Ford Windstar SE, LX, L (1999-2003) Full Rocker Kit, 8 Pieces, 6.5"-7" Tapered (TH39340)
TH39340 is a full-coverage rocker kit for the 1999-2003 Ford Windstar, tagged "4-door, Minivan, SE, LX, L." It's eight pieces of polished stainless steel that span "from the bottom of the molding to the bottom of the door," tapering from 6.5" to 7".
Three trims named
The record lists SE, LX and L. If your Windstar wears another badge, the data doesn't say whether it shares the same lower doors. Send a side photo with your call to 877-752-3811 and we'll check before you order.
Full Kit, molding to door bottom
This kit fills the whole painted band under the molding. Its top edge meets the molding; its lower edge reaches the bottom of the door. That makes the space between those two edges the critical measurement. Take it at the front and back of each door and slider. Six and a half to seven inches lines up with this record.
Which end is taller
The data gives the two figures without saying where each falls. Your own measurements and the product photos will show the direction of the taper.
Four doors on a minivan
The tag counts four. If your van's door count differs, call first.
No companion kits
This record has no siblings, so there's no narrower upper or lower kit to compare on this page.
Construction
Ford's 1999-2003 Windstar SE, LX and L take eight tapered pieces of polished 26 gauge 304 stainless steel from a USA shop, set between molding and door bottom with 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime with no harm to the minivan.
Eight pieces
The record doesn't map them. Sort with the photos, group the pieces by shape, and label each liner.
Sliding doors
Pieces on a sliding door need a full-travel test. After pressing one down, slide the door slowly all the way open and closed, watching the trim edge. If it catches anywhere, stop and call before continuing.
Molding
Press along it before starting. A loose section shifts the top line of the steel, so re-secure it first.
Prep
- Wash the full band and dry it.
- Alcohol-wipe the Windstar band.
- Repair any flaking paint inside the band.
Applying tall pieces
Seat the top edge under the molding with painter's tape. Peel a few inches of liner at one end and set it, then work across in short passes with a squeegee, pushing air toward the open end. Finish with firm pressure.
Windstar joint spacing
Measure each Windstar piece from the door edges and keep positions consistent.
Tools
Tape measure, painter's tape, marker, car soap, isopropyl alcohol, towels and a plastic squeegee. Dry, mild weather.
Upkeep
The Windstar waits a day to be washed; mild soap after.
Checking the trim badge
Look at the rear liftgate or the registration for SE, LX or L. If the badge is gone, the paperwork usually lists the trim. Mention it when you call.
The Windstar kit TH39340 carries UPC 691821727216; call 877-752-3811 with questions.
TH39340 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH39340 |
| UPC | 691821727216 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.5" to 7" tapered |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1999-2003 Ford Windstar |
Fitment: TH39340
| Vehicle | Years | Body style |
|---|---|---|
| Ford Windstar | 1999-2003 | 4-door, Minivan, SE, LX, L |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH39340 Rocker Panel Trim, Full Kit
Which Windstar is TH39340 for?
1999-2003 Ford Windstar 4-door minivan, SE, LX or L.
How tall is it?
6.5" to 7" tapered, molding to door bottom.
How many pieces?
Eight.
Will it work on the sliding doors?
Test each sliding door through its full travel after installing; call 877-752-3811 with any concern.
