Product Description
2001 Chrysler PT Cruiser Bumper Package: Front, Rear and Tailgate Insert in 7 Pieces of Stainless (BP41700)
BP41700 is a complete bumper package for a very specific car: the 2001 Chrysler PT Cruiser 4-door hatchback. QAA's catalog note describes it as a front and rear accent with a tailgate insert, all in seven pieces of polished stainless steel. Instead of buying separate parts for each end of the car, you get both bumpers and the tailgate area in one kit.
One model year only
This is important. QAA lists the PT Cruiser 4-door hatchback for the 2001 model year only. Owners of other model years should not assume this package will fit, because QAA does not list them for BP41700. Check your records, and call us if you have any doubt. The Fitment tab shows the single catalog row.
What the seven pieces cover
According to QAA, the package covers three areas: the front bumper, the rear bumper, and an insert for the tailgate. The catalog does not break down how many of the seven pieces go to each area or what shape each one takes. The product photos show the full set, and that is the best place to see how it all comes together.
Material
Every piece is made in the USA from 26-gauge 304 stainless steel with a polished mirror finish. It is solid stainless, so the brightness is the metal rather than a chrome coating on plastic. Grade 304 is a widely used stainless alloy for trim, and 26 gauge is the thickness of the sheet QAA uses.
Mounting
The pieces attach with 3M automotive-grade acrylic foam tape and install directly over the existing surface, so there is no drilling and nothing to remove from the car. QAA states the tape will hold for a lifetime without causing any damage to the paint. With three separate areas to cover, work on one zone at a time: front bumper, then rear bumper, then the tailgate insert. On a car from 2001, the surfaces may carry years of wax, so use a degreaser and let everything dry before you start. The Installation tab has complete instructions.
Under the hood too
QAA lists one companion part for the same car: EK41700, a three-piece engine trim package for the PT Cruiser 4-door hatchback. If you like the idea of polished steel outside and under the hood, it pairs naturally with this bumper package. It is linked in the Fitment tab.
About the part number
The product title and the SKU on this page both read BP41700, the seven-piece bumper package. Give that number when you call and we can pull the record up straight away.
Why a package
Ordering all three areas together means the front, rear, and tailgate pieces come from one set with one finish, and it lets you do the whole job in one session. It also saves you from ordering and matching three separate parts for a car with a single-year fitment.
Questions
Call Quality Automotive Trims at 877-752-3811. The UPC is listed in the Specs tab.
BP41700 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | BP41700 |
| UPC | 691821605217 |
| Part type | Bumper Package |
| Pieces in kit | 7 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Front and Rear Accent with Tailgate Insert |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2001 Chrysler PT Cruiser |
Fitment: BP41700
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler PT Cruiser | 2001 | 4-door, Hatchback |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2001 Chrysler PT Cruiser
- EK41700: 3-piece Engine Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Bumper Package
- Unpack all 7 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: BP41700 Bumper Package
What years of PT Cruiser does BP41700 fit?
QAA lists the 2001 Chrysler PT Cruiser 4-door hatchback only.
What does the package include?
Seven pieces: a front and rear bumper accent with a tailgate insert.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
How does it attach?
With 3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without damaging the paint.
Is there matching engine trim?
Yes. EK41700 is a three-piece engine trim package for the same car.
