Product Description
2014-2019 Chevrolet Corvette C7 Stainless Door Handle Accents, 2 Pieces (DH54115)
DH54115 is a two-piece door handle accent set for the 2014-2019 Chevrolet Corvette C7, listed as a 2-door. QAA makes it from 26-gauge 304 stainless steel, polished and made in the USA, and it installs directly over the existing surface with 3M automotive-grade acrylic foam tape. Two doors, two pieces.
Built for the C7 only
QAA tags this part, and every matching Corvette part, with a simple note: "C7." Fitment is a single row, Chevrolet Corvette C7, 2014 through 2019, 2-door. If your Corvette falls outside those years, this set is not listed for it. The Fitment tab repeats the row.
What door handle accent trim does
Accent trim is flat polished metal that sits around the handle area rather than replacing or wrapping the handle. It outlines the Corvette's door brightly while the factory hardware stays exactly as it is. The catalog does not describe the precise shape, so the product photos show how each accent sits.
The rest of the C7 lineup
QAA catalogs a wide set of C7 trim, all marked with the same "C7" note:
- HT54115, a 15pc hood accent trim
- SP54115, a 1pc front grille accent trim
- SG54115, a 2pc front end trim
- PB54115, a 2pc porthole accent trim
- GC54115, a 1pc gas door cover ring trim
- RD54115, a 1pc rear deck accent
- LP54115, a 1pc license plate bezel
Handle accents are a small, easy first step, and the list above shows how far the polished look can go from the hood to the rear deck.
About 304 stainless at 26 gauge
Type 304 is a widely used stainless grade. At 26 gauge it is thin, letting each accent sit low against the door. QAA polishes the surface to a mirror shine, and because it is solid stainless rather than a coating, the bright finish is the metal itself.
Installing on a 2-door
For the Corvette C7, QAA says the tape will hold for a lifetime with no damage to the car's surface. With just two pieces, the job is short:
- Wash the handle area on each door, then wipe it with degreaser.
- Let it dry completely.
- Hold the accent in place with the liner on and check it from a few steps back.
- Peel the liner and press the accent firmly for several seconds.
Match the second accent to the first so both doors look identical. The Installation tab has full detail.
A clean press
Press through a microfiber cloth to keep fingerprints off the polished face. Before peeling, a couple of small strips of painter's tape around the dry-fitted accent give you a target, which matters because the foam tape grabs the moment it touches paint and there is no easy second try.
Conditions and care
Work on a dry, mild day in the shade and keep the car dry overnight. Wash the stainless later with mild soap and a soft towel, avoiding abrasive pads.
Questions
For the Corvette pair, ring Quality Automotive Trims at 877-752-3811 and mention DH54115; Specs lists the UPC.
DH54115 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DH54115 |
| UPC | 840251602918 |
| Part type | Door Handle Accent Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | C7 |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Chevrolet Corvette C7 |
Fitment: DH54115
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Corvette C7 | 2014-2019 | 2-door |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Chevrolet Corvette C7
- GC54115: 1-piece Gas Cap Door Ring Trim
- HT54115: 15-piece Hood Accent Trim
- SP54115: 1-piece Front Grille Accent Trim
- SG54115: 2-piece Front End Trim
- PB54115: 2-piece Porthole Accent Trim
- RD54115: 1-piece Rear Deck Accent
- LP54115: 1-piece License Plate Bezel
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Door Handle Accent Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DH54115 Door Handle Accent Trim
Which Corvette does DH54115 fit?
The 2014-2019 Chevrolet Corvette C7, 2-door.
How many pieces?
Two, one for each door.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
Do I need to drill?
No. It installs directly over the existing surface with 3M tape.
How long will the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
