Product Description
Dodge Challenger 2009-2010 Stainless Fender Trim, 0.75" – WZ49915
WZ49915 is a four-piece Wheel Well Fender Trim set for the Dodge Challenger coupe, 2009 and 2010. The record gives a 0.75" width and the fitment as 2-door, Coupe.
Narrow trim
The record gives each piece as 0.75" wide. Measure the area beside your openings against it, and compare the photos, before ordering.
Challenger stainless
Molded, imported, high quality stainless steel per the record. In QAA's words, cut to perfection & polished to a mirror shine.
Clip on or screw in
Both are listed, and lock tabs and screws come in the box. Use one on all four openings.
No linked parts
No other Challenger parts are tied to this SKU.
Years
Only 2009 and 2010 are listed. For any other Challenger year, ask QAA at 877-752-3811 before ordering.
Placement
The record doesn't say which piece goes on which opening. Use the photos.
Before ordering
Year, width and photos. Have SKU WZ49915 and the UPC to hand.
The day
Dry weather, time to clean every opening, and the four pieces set out by the coupe in photo order.
Cleaning
Wash each opening with a mild shampoo, rinse, dry with microfiber. Wax-and-grease remover lifts tar.
Fitting
Line each piece up loose against its photo; fasten it along its length once it matches. Fit the Challenger openings one after another.
Pausing
If a piece won't line up, leave it unfastened and call QAA.
Carton
Four narrow pieces, tabs and screws.
After the job
Walk around the Challenger after a week. If a piece sits unevenly, phone QAA. Keep spares in the trunk.
Care
Hand-wash, then buff dry.
Measuring a narrow piece
Because the trim is 0.75" wide, measure carefully. Run a tape across the fender area next to each opening, and compare the measurement and the shape with the photos. If the area on your car looks wider or narrower than the photos suggest, call QAA before ordering.
Clips or screws: choosing
The record doesn't say which suits the Challenger. If you're undecided, describe your openings to QAA by phone. Use the same method on all four pieces so they sit alike.
Before the first piece
With the openings clean and dry, hold each piece up one more time and compare it with its photo. Fasten it only if it matches. A loose piece is easy to set aside; a fastened one takes longer to undo.
Order of work
Start at a front Challenger opening, then its rear, then the remaining two.
Questions
When you phone QAA, give the year, the SKU and the UPC, and ask about the width if you want it confirmed for your car. One call can cover the fit and the fastening choice.
Spare hardware
Once the four pieces are on, store the unused fastener type, and any extras of the one you used, in the trunk. A spare on hand saves a call if one goes missing later.
Leave the coupe unwashed for a day after fitting.
Challenger WZ49915 · UPC 691821692637 · 877-752-3811.
WZ49915 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WZ49915 |
| UPC | 691821692637 |
| Part type | Wheel Well Fender Trim Molding |
| Pieces in kit | 4 |
| Material | Molded Stainless Steel |
| Finish | Polished to a mirror shine |
| Width | 0.75" |
| Mounting | Clips or screws provided; hardware included |
| Origin | Imported |
| Fits | 2009-2010 Dodge Challenger |
Fitment: WZ49915
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Challenger | 2009-2010 | 2-door, Coupe |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Wheel Well Fender Trim Molding
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Mount with the clips or screws provided (hardware is included).
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WZ49915 Wheel Well Fender Trim Molding
Which Challenger does WZ49915 fit?
The 2009-2010 Dodge Challenger, 2-door Coupe.
What width is it?
0.75".
How is it installed?
Clip on or screw in; lock tabs & screws are included.
How many pieces?
Four.
