Product Description
Nissan Sentra SE-R 2007-2011 Stainless Front Vent / Fog Light Trim, 2 Pieces (FV28575)
The key word on this listing is SE-R. FV28575 is a two-piece polished stainless front accent for the Nissan Sentra 4-door sedan, 2007 through 2011, and the fitment row says SE-R only. The steel is 304 grade at 26 gauge, made in the USA.
SE-R only
QAA's row reads: Nissan Sentra, 2007-2011, 4-door, Sedan, SE-R only. If your Sentra is another trim, this listing doesn't cover it. Check your Sentra's trim level or badging before ordering. The Fitment tab shows the row exactly.
What the part is
The title and the part-type field call it a front vent accent, and the included-items line calls it fog light trim. We've flagged the wording difference for review. Either way, it's a pair of polished accents for the front of the car. No dimensions are listed, so the product photos are your reference. Compare them with the front of your SE-R, and if they don't match, call us before you buy.
The steel
Type 304 stainless at 26 gauge, polished. The brightness is the metal itself rather than a coating.
How it mounts
3M automotive-grade acrylic foam tape holds each piece, and they install directly over the existing surface. No drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Prep at the front
Wash the lower front of the car with a soft brush to lift bugs and grit from the edges. Rinse and degrease the mounting areas, repeating until a clean cloth comes away clean. If you've used a spray wax or sealant, remove it. Check the surface for chips or peeling. Let it dry completely.
Install
- Dry-fit both pieces with the liners on, using the photos as a guide.
- Stand in front of the car and check that the two pieces sit evenly.
- Mark the edges with painter's tape.
- Peel one liner, align, and press firmly over the whole piece.
- Press again after a minute; repeat with the second piece.
Prep details are laid out in full on the Installation tab.
Spacing tips
Pairs are judged against each other. Measure from a fixed point, such as the edge of the grille or a headlight, to each piece and keep the numbers the same for both. A helper standing in front of the car can tell you which way to nudge a piece before it's pressed down.
Why the front accents
Polished trim at the front puts a bright detail on the Sentra's face while the parts underneath stay untouched.
Ordering checklist
- Sentra from 2007-2011.
- SE-R trim.
- Photos match your front end.
Take a photo first
A quick photo of your SE-R's front end is handy for comparing with the product photos, and for describing things clearly if you call.
Conditions
Fit them on a mild, dry day away from direct sun, then keep the car dry overnight.
Care
Wipe with mild soap on a soft cloth.
Questions
For the Sentra vent pair, ring 877-752-3811 and quote FV28575. The Sentra vent pair's UPC is printed in Specs.
FV28575 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FV28575 |
| UPC | 691821581801 |
| Part type | Front Vent Accent |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2011 Nissan Sentra |
Fitment: FV28575
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Sentra | 2007-2011 | 4-door, Sedan, SE-R only |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Front Vent Accent
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FV28575 Front Vent Accent
What does FV28575 fit?
The 2007-2011 Nissan Sentra 4-door sedan, SE-R only.
Will it fit a Sentra that isn't an SE-R?
No. The catalog lists SE-R only.
How many pieces?
Two.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
