Product Description
Jeep Wrangler JK 4-Door 2007-2018 Stainless Hinge Cap Package, 12 Pieces (HP47085)
HP47085 is the twelve-piece stainless hinge cap package for the Jeep Wrangler JK 4-door SUV, model years 2007 through 2018. That's twelve years on a single Fitment row, and the row is tagged 4-door only. The 2-door JK has its own package on the same sheet, HP47090, an eight-piece set, so make sure you pick the one that matches your door count.
All twelve Wrangler caps are polished 304 stainless steel at 26 gauge, made in the USA. 3M automotive-grade acrylic foam tape holds each cap. The package installs directly over the existing surface, without drilling, and QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
The catalog doesn't break down which hinge each of the twelve caps fits, so the product photos are essential for sorting. Before you clean anything, lay all twelve out and group them by location using the photos. Keep each group together and install one location at a time, which makes it much harder to put a cap on the wrong hinge. If a piece's position isn't clear, call us before you peel the liner.
Hinges are where grease, dirt and old wax tend to collect, so surface prep takes a little longer here than on a flat panel. Wash each hinge with soapy water, rinse and dry, then degrease thoroughly, getting into the seams. Repair any chipped or flaking paint, and deal with any surface rust, before installing, because the tape needs a firm, clean surface to hold. Dry-fit each cap with its liner on, then peel, set and press firmly over the whole cap, working into any curves. After each door's caps are on, open and close that door slowly to make sure nothing binds. Press every cap again after a minute. The Installation tab has more detail.
The JK sheet is long, so read each tag. HD47085, a two-piece upper hood accent, and DH47085, a ten-piece door and tailgate handle cover package that includes the rear tailgate set, are both tagged 4-door. GC47085 is a one-piece gas door surround ring and ML47085 a two-piece set of fog light surround rings, also 4-door. MC47085, a two-piece mirror cover set, and DH47082, a two-piece tailgate handle cover kit with a note reading "Door Handle Trim," are tagged for both 2-door and 4-door. DH47090, a six-piece handle cover kit, is tagged 2-door yet noted as including the rear door, which we've flagged. Eleven more are listed by number only. Check each listing for its finish.
Polished 304 stainless gives every hinge a bright finish, and 26 gauge keeps the caps slim. Install on a dry, mild day and let the tape set overnight. Afterward, rinse off mud and wash with mild soap and a soft cloth.
Twelve caps is an afternoon project rather than a quick job, so plan for it. Work in the shade, keep a clean towel and the degreaser close by, and finish one location completely before moving to the next. Questions? Call Quality Automotive Trims at 877-752-3811 and mention HP47085. The UPC is on the Specs tab.
HP47085 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | HP47085 |
| UPC | 691821336975 |
| Part type | Hinge Cap Package |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2018 Jeep Wrangler JK |
Fitment: HP47085
| Vehicle | Years | Body style |
|---|---|---|
| Jeep Wrangler JK | 2007-2018 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2018 Jeep Wrangler JK
- DH47090: 6-piece Door Handle Cover Kit
- DH47082: 2-piece Tailgate Handle Cover Kit
- DH47085: 10-piece Door and Tailgate Handle Cover Package
- GC47085: 1-piece Gas Cap Door Trim
- HD47085: 2-piece Hood Accent
- MC47085: 2-piece Mirror Cover Set
- ML47085: 2-piece Marker Light Accent
- PP47085: 4-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Hinge Cap Package
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: HP47085 Hinge Cap Package
Which Wrangler does HP47085 fit?
The 2007-2018 Jeep Wrangler JK 4-door SUV.
Is there a version for the 2-door JK?
Yes. HP47090 is the eight-piece hinge cap package tagged for the 2-door.
How many pieces are included?
Twelve hinge caps.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
