Product Description
Cruze Sedan 12-Piece Pillar Trim with Front and Rear Pillar Pieces, 2016-2019 (PP56147)
With twelve pieces, PP56147 covers both ends of the Cruze sedan's window line. QAA's catalog notes that it includes two front and two rear pillar pieces, so the polished steel extends forward toward the windshield and back behind the rear doors. It is listed for the 4-door Chevrolet Cruze sedan, 2016 through 2019. On the Cruze, this twelve-piece set is the step between eight and sixteen.
Front and rear, explained
The front pillars are the posts that run alongside the windshield, and the rear pillars sit behind the back door glass where the roof slopes toward the trunk. Smaller kits leave one or both of those areas in their existing finish. This kit brings both into the steel frame, so the bright outline runs from the windshield to the rear glass. It is a much more complete look than the base kit.
How it fits into the lineup
QAA offers five pillar kits for this car, and the catalog notes make the differences clear:
- PP56145: 4 pieces, the base kit.
- PP56146: 8 pieces, including two rear pillar pieces.
- PP56147: 12 pieces, two front and two rear pillar pieces (this kit).
- PP56148: the largest set at 16 pieces; it takes in the triangle pieces at both ends and is listed for L and LS models that have no factory chrome.
- PP56149: 16 pieces, same coverage, for the LT model with factory chrome.
The only thing this kit leaves out compared with the sixteen-piece sets is the triangle pieces. If you want front and rear pillars covered without worrying about which trim level you have, PP56147 is the practical choice, since QAA attaches no trim-level note to it.
What pillars do for a sedan's looks
Pillars are the upright body sections that support the roof and frame the glass. On the Cruze they are easy to see from the side. Wrapping them in polished steel gives every window a clear edge and makes the whole side of the car look more finished.
Material
All twelve pieces are made in the USA from 26-gauge 304 stainless steel, polished to a mirror shine. This is solid stainless rather than plated plastic, so the brightness is part of the metal and every piece matches.
Installation
Each piece mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface. The Cruze trim and panels stay in place. QAA states the tape will hold for a lifetime without causing damage to the vehicle's surface. Twelve pieces calls for some organization: lay them out by position, clean every pillar, and dry-fit before peeling a liner. Dry-fit the twelve Cruze pieces with the photos open so each post gets the correct cover. The Installation tab has the full sequence.
Fitment
Listed for the Chevrolet Cruze 4-door sedan in model years 2016, 2017, 2018, and 2019. The Fitment tab shows the application as QAA catalogs it.
Reference and help
The Specs tab lists part number PP56147, UPC 691821280346, the material, and the twelve-piece count. For a walk-through of how this kit compares with the sixteen-piece sets, call Quality Automotive Trims at 877-752-3811.
PP56147 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP56147 |
| UPC | 691821280346 |
| Part type | Pillar Post Trim |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Includes two front and two Rear Pillar pieces |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2019 Chevrolet Cruze |
Fitment: PP56147
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Cruze | 2016-2019 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2019 Chevrolet Cruze
- PP56145: 4-piece Pillar Post Trim
- PP56146: 8-piece Pillar Post Trim
- PP56148: 16-piece Pillar Post Trim
- PP56149: 16-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP56147 Pillar Post Trim
Which pillars does PP56147 include?
QAA notes that it includes two front and two rear pillar pieces, 12 pieces in total.
How is it different from the 16-piece kits?
The 16-piece kits (PP56148 and PP56149) also include the front and rear triangle pieces and are split by trim level. PP56147 does not include the triangle pieces.
Do I need to know my trim level?
Not for this kit. QAA lists it for the 2016-2019 Cruze 4-door sedan without a trim-level note.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without damaging the vehicle.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
Who can I call?
Quality Automotive Trims at 877-752-3811.
