Product Description
Pontiac Vibe 2003-2008 Four-Cover Pillar Post Trim (PP47275)
Four polished stainless pillar post covers for the Pontiac Vibe make up PP47275. The listing covers 2003-2008, the set is $67.99, and the steel is 26 gauge 304, made in the USA. Its fitment row reads Pontiac Vibe 2003-2008, tagged 4-door, Hatchback.
Your Vibe. Any four-door hatchback Vibe from those six model years matches the row. Vibes dated 2003 through 2008 are tagged for four covers. A Vibe outside 2003 to 2008 isn't covered by this record, so call before ordering if yours falls outside it or the year isn't clear.
Four or six. PP47276 is the linked six-cover Vibe set. Neither listing names its posts, gives widths or carries notes. Put the two galleries next to each other and you'll see which posts the six-piece reaches that this set leaves bare.
Before peeling. Take the photos out to the car on your phone and hold each up to the post it seems to belong on. Four placements decided in advance make the fitting quick.
Call us. Quality Automotive Trims picks up at 877-752-3811. Tell us PP47275 and your model year, and we'll go through the four shapes with you, one post at a time, whether you're still deciding between the two Vibe sets or already have the covers in hand.
Appearance only. The covers trim the posts round the Vibe's side glass, while its doors, windows and seals go on working unchanged. 304 stainless fends off corrosion by its own chemistry; there's no plating.
Fitting method. Each cover mounts with 3M automotive-grade acrylic foam tape onto the post's current paint or trim. Nothing is drilled and no trim is taken off the hatchback. The Installation tab lists the temperature range and cure time.
Prepping four posts. Get every trace of wax and polish off, and repair paint that's chalking, crazed or peeling, because the tape can hold no better than that coat. Wash with car soap, rinse, and dry fully. Wipe each post with rubbing alcohol on a lint-free cloth, refolding until a clean fold stays clean, and run a finger along it for dents.
Kit list. Painter's tape and a pencil, rubbing alcohol, a few lint-free cloths and a bucket of car-soap water. Keep the gallery open on your phone nearby so you can glance at each photo as you go.
Putting them on. Pick a dry, windless day in shade. Check the four against the gallery and let us know about any damage. Label the posts one to four on painter's tape. With its liner still on, hold the first cover on its post, ease it until the margin is the same all round and tape its outline. Peel, set it inside the outline and press firmly along its face and both edges. Check it, then fit the next.
A piece that won't lie flat. If one end stays raised or the cover rocks, keep its liner on and phone 877-752-3811 so we can help. After the tape cures, wash the four with car soap and water and dry with a soft towel.
PP47275 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP47275 |
| UPC | 691821572830 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2003-2008 Pontiac Vibe |
Fitment: PP47275
| Vehicle | Years | Body style |
|---|---|---|
| Pontiac Vibe | 2003-2008 | 4-door, Hatchback |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2003-2008 Pontiac Vibe
- PP47276: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP47275 Pillar Post Trim
What does PP47275 fit?
The Pontiac Vibe 2003-2008, tagged 4-door, Hatchback.
Is there a bigger set?
Yes, PP47276 with six covers.
Which posts do the four cover?
The listing doesn't name them. Compare the gallery or call 877-752-3811.
Will I need to drill?
No. The covers mount with 3M automotive-grade acrylic foam tape directly over the existing surface.
How should I clean them?
Car soap and water once cured, then a soft towel.
