Product Description
PP14103: Six-Piece Stainless Pillar Covers for the 2014-2020 Lexus IS
Six polished covers for the pillars of a 2014-2020 Lexus IS sedan. PP14103 is cut from 26 gauge 304 stainless steel, made in the USA, and attaches with 3M automotive-grade acrylic foam tape right over the existing surface. The title and the one fitment row agree: Lexus IS, 2014-2020, 4-door, Sedan.
Six pieces, compared honestly. PP14102, a four-piece set, is the only other pillar listing for this IS. Both listings have no notes, and neither says which pillars it covers or whether there's a triangle piece. That leaves the photos as the guide. Look at the outlines side by side, note the shapes that appear in one gallery but not the other, and decide which ones you want. If yes, PP14103 is the one to buy. If you'd rather keep it simple, the four-piece set has less to fit. Choose either the four or the six for your IS, comparing galleries before ordering both.
Fit, in one sentence. A 4-door Lexus IS sedan from 2014 through 2020 is on the row; anything else, call 877-752-3811 with PP14103 first.
Mounting. The tape goes directly over the existing surface, so you won't drill and no trim comes off. Lexus IS pillar prep is on the Installation tab.
Metal. Polished 304 stainless doesn't rely on a plated finish, so there's no coating to peel, and a minor scuff during handling won't show a different color underneath. At 26 gauge the covers stay thin against the pillars.
Supplies. A bucket, mild car shampoo, two or three soft towels, isopropyl alcohol, a lint-free cloth, painter's tape and a pencil, plus a step stool for the tops of the pillars.
Prep, the patient way. Wash each pillar, rinse away all the soap, and dry. Wipe with the alcohol and wait for it to flash off completely. If there's wax or a ceramic coating on those posts, strip it where the tape lands. Rushing this step weakens the bond.
Mapping. Match the six covers to the photos on a towel. Starting at the front of the IS, hold each cover to its pillar with its liner on, sight along both edges until it hugs the post, then mark each end with painter's tape. Write the spot on the liner. Finish the mapping, checking similar covers against each other.
Pressing. Peel one liner at a time. Lay the cover between its marks, press firmly from one end to the other and along both edges, then go to the next post. Walk back a few paces after every two covers to compare. Temperature range and cure time are on the Installation tab.
Conditions. Dry and mild, out of direct sun or in a garage, so the panel isn't hot.
When the box arrives. Count six covers against the photos. If one won't sit flush, keep its liner on, try another pillar, and call Quality Automotive Trims at 877-752-3811 with your year if it still won't fit. Mild soap and a soft cloth are all it needs later.
PP14103 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP14103 |
| UPC | 691821451609 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2020 Lexus IS |
Fitment: PP14103
| Vehicle | Years | Body style |
|---|---|---|
| Lexus IS | 2014-2020 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2020 Lexus IS
- PP14102: 4-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP14103 Pillar Post Trim
What does PP14103 fit?
The Lexus IS 2014-2020, 4-door Sedan.
Do I need PP14102 too?
Choose one of them. Combining IS listings isn't the plan; call 877-752-3811 first if you're thinking about it. Compare photos and choose one.
Is there a triangle piece?
The listing has no notes and doesn't name one.
Is drilling required?
No. It uses 3M automotive-grade acrylic foam tape directly over the existing surface.
How many covers come in the set?
Six polished 26 gauge 304 stainless covers.
