Product Description
PP18282: Six Polished Pillar Covers for the 2018-2022 Honda Accord Sedan
For the 2018-2022 Honda Accord 4-door sedan, PP18282 is the six-piece pillar post set. It's the larger of two sets on this sheet; the four-piece PP18281 is the other. Both are polished 304 stainless, made in the USA.
Fitment. Honda Accord, 2018-2022, 4-door, Sedan. That's the single row. For an Accord outside it, call Quality Automotive Trims at 877-752-3811 and quote PP18282.
Six or four. Neither listing has notes, a width or the names of the pillars it covers. All they state is the count. The photos are therefore the deciding factor: compare the two galleries and look for outlines found only in this one. If you'd like those spots dressed in stainless too, take this set, listed at $84.49. If not, the smaller set does the job with less fitting. For the Accord, a single set is the plan, and a call is wise before mixing two.
The metal. 26 gauge 304 stainless steel with a polished face. There's no plating to wear through, so the brightness is the steel.
Mounting. 3M automotive-grade acrylic foam tape, directly over the existing surface. You won't drill, and no trim comes off. Temperature range and cure time are on the Installation tab.
What pillar trim is. The pillars are the upright panels around the side windows. These covers are thin stainless shapes that sit on their faces, leaving the panels unchanged underneath.
Before you order. Check two things. First, confirm the year falls inside 2018-2022 and the car is the 4-door sedan, using your records if you're unsure. Second, look at your own pillars next to the product photos. If a cover outline doesn't match a panel on your car, stop and phone before ordering instead of after. Both checks take a couple of minutes and prevent most returns.
Timing. Allow an unhurried hour or so. Most of it goes on cleaning and test fitting; the pressing itself is quick once every position is marked.
Supplies. Mild car soap, rubbing alcohol, lint-free cloths, painter's tape and a pencil. A helper is handy with six covers.
On arrival. Count six covers and match each to its photo. If anything is bent or missing, call before you begin.
Cleaning. On a dry, shaded day, wash the pillar areas, rinse and dry with a microfibre. Wipe each with rubbing alcohol and let it flash off. Strip any wax or ceramic coating where tape will sit; tape needs a bare, clean surface.
Mapping. Match the covers to the photos and keep the backings on. Offer each one up, sight down both edges, and mark its place with painter's tape, noting the spot on the backing in pencil.
Pressing. When all six have a home, peel and press them one by one, rubbing firmly from end to end and along both edges. Step back between covers to check the lines.
Problems. A cover that won't settle should keep its backing on until you've phoned 877-752-3811.
Care. Once cured, wash with regular car soap and dry with a clean towel.
PP18282 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP18282 |
| UPC | 691821649341 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2022 Honda Accord |
Fitment: PP18282
| Vehicle | Years | Body style |
|---|---|---|
| Honda Accord | 2018-2022 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2022 Honda Accord
- PP18281: 4-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP18282 Pillar Post Trim
What does PP18282 fit?
The 2018-2022 Honda Accord, 4-door Sedan.
How many covers?
Six polished 304 stainless steel covers. PP18281 has 4.
Which pillars are covered?
The listing doesn't say. Check the photos or call 877-752-3811.
Should I buy both Accord sets?
No. Order one Accord set, comparing photos or calling first if you're weighing two.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
