Product Description
6-Piece Stainless Pillar Trim for the 2023-2025 Dodge Hornet (PP63951)
PP63951 is the larger of QAA's two pillar kits for the Dodge Hornet. Six polished stainless steel pieces dress the window pillars of the 4-door Hornet SUV, and the kit is listed for model years 2023 through 2025.
Six instead of four
The smaller kit, PP63950, has four pieces. QAA does not record which pillars each piece covers, so the catalog cannot say exactly where the two additional covers in this kit go. Compare the photos on both listings to see the difference. Six pieces suits owners who want more of the window frame in bright metal.
Years listed
This kit is listed for Hornet model years 2023 through 2025. If your vehicle is newer, call QAA before ordering. The Fitment tab shows the exact catalog entry.
Pillars, briefly
Pillars are the vertical posts between the side windows. Mirror stainless covers give those posts a bright edge and sharpen the Hornet's side view. They sit on top of what is already there and do not alter the vehicle.
Construction
- Six Hornet pieces, 26-gauge 304 stainless
- Polished to a mirror look
- Built by QAA in America
- The Hornet pieces use 3M automotive-grade acrylic foam tape
Solid stainless means no plating to flake, and all six pieces match.
Mounting
The covers install directly over the existing surface. You will not take anything apart. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
Step by step
Lay out the six Hornet pieces by position. Clean each pillar with soap and water, let it dry, and remove wax. Dry-fit each cover, then peel the liner and press firmly along its full length. Press each fully before moving on. A strip of painter's tape on each piece marking its position helps keep things straight; peel it off before final pressing. Choose a mild, dry day out of direct sun. The Installation tab lists each step.
Care
Mild soap, water, and a soft towel keep the polish looking new. Avoid abrasive pads or scouring cleaners on the covers.
Who chooses six
Owners who looked at the four-piece kit and wanted a more noticeable result usually land here. Since both Hornet kits share the same fitment, the choice is about appearance only. Each kit is complete on its own, so compare the photos and decide once. QAA can talk you through the difference by phone if needed.
Getting the lines right
With six covers, consistency is what makes the finished job look professional. Place the first Hornet piece carefully, since it becomes your reference. Step back after every piece to check that the lines look straight and even. If something does not line up during the dry-fit, compare it with the listing photos before pressing rather than forcing it into place. Taking a few more minutes here makes the end result look clean from every angle.
Specs and contact
For the Hornet, PP63951 carries UPC 840251603175. Check the Specs tab for material, gauge, finish and piece count, or phone Quality Automotive Trims at 877-752-3811.
PP63951 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP63951 |
| UPC | 840251603175 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2023-2025 Dodge Hornet |
Fitment: PP63951
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Hornet | 2023-2025 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2023-2025 Dodge Hornet
- PP63950: 4-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP63951 Pillar Post Trim
How does PP63951 compare with PP63950?
PP63951 has six pieces and PP63950 has four. The catalog does not state which pillars the further pieces cover.
Which years fit?
The Dodge Hornet 4-door SUV, 2023 through 2025.
How does it attach?
3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
Who do I call?
Quality Automotive Trims at 877-752-3811.
