Product Description
Six Mirror-Finish Pillar Covers for the 2023-2026 Sequoia (PP73141)
PP73141 is the middle option in QAA's Toyota Sequoia pillar range. Six covers of polished 304 stainless steel are listed for the 4-door Sequoia SUV from model year 2023 through 2026.
Choosing among three Sequoia kits
The choices are four pieces (PP73140), six pieces (this kit), and eight pieces (PP73142). QAA's data does not carry a coverage note for any of them, so it never states which posts each kit covers. If the difference matters to you, the photos and a quick phone call are the way to settle it. What the data does confirm is that all three share fitment, material, finish, and mounting.
Why six on a Sequoia
Two more covers than the starter kit put noticeably more bright metal along the side of the SUV. It is a sensible middle ground for owners who want the trim to stand out without going to the largest set.
Facts at a glance
- Six Sequoia covers with a mirror polish
- 26-gauge 304 stainless steel
- Built by QAA in the USA
- Held on the Sequoia by 3M automotive-grade acrylic foam tape
- Fits over the pillars as they stand
- UPC 840251602369
Model name in the record
The Fitment tab shows the model as "Sequioa", a misspelling of Sequoia in QAA's data. It is the same Toyota SUV named in the title.
The tape
No panel removal. The 3M tape holds the covers to the existing surface, and QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
Seeing what you are doing
Use a sturdy step if you cannot comfortably see the upper ends of the pillars. You want to see each cover square-on while placing it and to press evenly along its length.
Steps
Choose a dry, mild day. Clean and dry the pillars, then remove wax. Match the six Sequoia covers to the photos and dry-fit each one. Once a piece lines up with the photos, peel the backing and press firmly. Press them one at a time, then let the bond rest a few days before washing. The Installation tab has the complete guide.
More for the same SUV
The RW73140 two-piece rear window trim is listed for this Sequoia too, sold on its own.
Cleaning
Mild soap, plenty of water, and a microfiber towel. No scouring pads.
Handling tips
Keep the polished faces on a soft towel while you work so they do not pick up scratches from the driveway. Once a liner is off, avoid touching the adhesive; oil from fingertips weakens the bond. Work when the panels are neither cold nor hot to the touch. A helper holding the photos and checking alignment from a few steps back can make six pieces go quickly.
Before you order
Confirm the model year on your registration. If you are buying for someone else, ask them rather than guess. Each Sequoia kit is a complete set, so if eight pieces is the look you want, choose PP73142 instead of planning to buy pieces later.
Help
Sequoia pillar kit PP73141: Quality Automotive Trims answers at 877-752-3811.
PP73141 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP73141 |
| UPC | 840251602369 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2023-2026 Toyota Sequioa |
Fitment: PP73141
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Sequioa | 2023-2026 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2023-2026 Toyota Sequioa
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP73141 Pillar Post Trim
What does PP73141 fit?
The 4-door Toyota Sequoia SUV, 2023-2026.
How is it different from the other Sequoia kits?
It has six pieces. PP73140 has four and PP73142 has eight. The catalog does not give coverage notes for them.
How does it attach?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle.
What is it made of?
Mirror-polished 26-gauge 304 stainless steel, made in the USA.
Is there matching trim?
The RW73140 two-piece rear window trim is listed for the same SUV.
Phone number?
877-752-3811, Quality Automotive Trims.
