Product Description
Hummer H2 Rear Bumper Accent with HUMMER Logo Cutout, 3 Pieces, 2003-2009 (HV43012)
HV43012 is a three-piece rear bumper accent for the 2003-2009 Hummer H2 4-door SUV, and its catalog note explains its shape: "Includes Cut Out for HUMMER logo." The stainless is cut so the brand name on the bumper stays visible, rather than being covered up. All three pieces are 26-gauge 304 stainless steel, polished to a mirror finish and made in the USA.
The logo cutout
Because the accent is shaped around the logo, alignment matters more than it does on a plain strip. The cutout gives you a built-in reference: once the opening frames the lettering evenly, the piece is in the right spot. The catalog doesn't describe how the three pieces divide the bumper or which one carries the cutout, so rely on the product photos for the layout, and compare them with your own rear bumper before ordering. If the logo on your H2 has been removed or replaced, call first.
Pair it with stainless letters?
The H2 sheet also lists HV43001, an eight-piece set noted as "HUMMER" rear bumper letters and two accent pieces. Since this accent leaves the logo open and that kit dresses the letters themselves, the two are natural candidates to look at together. The catalog doesn't state that they're designed as a pair or how their pieces relate, so check both listings' photos, or call and we'll help you decide whether to order one or both.
Fitment
The row reads Hummer H2, 4-door SUV, 2003 through 2009. No package or trim exclusions are listed. Check your H2's year against the range before ordering.
Install
The three H2 bumper accents mount with 3M automotive-grade acrylic foam tape over the existing surface, so nothing is drilled. QAA says the tape holds for a lifetime without harming the Hummer's surface.
Wash the bumper and lift off wax with rubbing alcohol first; one treated with a protectant needs a more thorough clean. Let it dry fully. Dry-fit all three pieces with the liners on, starting with whichever piece frames the logo, and check the gap around the lettering from straight behind the SUV. Once the layout looks even, peel and press that piece first, then the other two, pressing firmly along every edge. A second firm pass over all three helps. The Installation tab covers temperature and cure time.
More for the back of the H2
Other rear-area parts on the sheet include HV43010, a one-piece tailgate accent; HV43005, a one-piece license plate bezel; and HV43016, a fourteen-piece tail light ring package. Check each listing before ordering.
Care
Wash with mild soap and water and dry with a soft towel. Take care around the logo edges with your towel so it doesn't snag. Keep abrasives away from the 304 stainless, which the listing says is polished to a mirror shine.
Questions about the cutout or pairing with the letter kit? Call Quality Automotive Trims at 877-752-3811 and mention HV43012. The Specs tab has the UPC.
HV43012 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | HV43012 |
| UPC | 691821522835 |
| Part type | Rear Bumper Trim |
| Pieces in kit | 3 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Includes Cut Out for HUMMER logo |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2003-2009 Hummer H2 |
Fitment: HV43012
| Vehicle | Years | Body style |
|---|---|---|
| Hummer H2 | 2003-2009 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2003-2009 Hummer H2
- HV43001: 8-piece Letter Insert Graphics
- HV43003: 2-piece Hood Handle Accent Trim
- HV43004: 8-piece Hood Latch Base Accent Trim
- HV43005: 1-piece License Plate Bezel
- HV43006: 10-piece Hood Accent Package
- HV43007: 5-piece Front Bumper Trim
- HV43008: 6-piece Front Bumper Trim
- HV43009: 7-piece Front Bumper Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim
- Unpack all 3 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: HV43012 Rear Bumper Trim
Does HV43012 cover the HUMMER logo?
No. QAA notes it "Includes Cut Out for HUMMER logo," so the logo stays visible.
Which years of the H2 does it fit?
2003-2009, 4-door SUV.
Can I combine it with HV43001?
HV43001 is the eight-piece "HUMMER" rear bumper letter kit. The catalog doesn't say the two are a set, so compare photos or call 877-752-3811.
How many pieces?
Three, in polished 26-gauge 304 stainless steel.
How do they attach?
With 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
