Product Description
Chevy Malibu 2013-2015 and Malibu Limited 2016 Rear Bumper Trim, Stainless (RB53105)
RB53105 is a one-piece rear bumper trim in mirror-polished 304 stainless steel. The fitment lists the Chevrolet Malibu 4-door sedan from 2013 through 2015 and the Chevrolet Malibu Limited from 2016. It is made in the USA and goes on with 3M tape.
The 2016 Malibu Limited is on the list
The product title and the fitment data both list the 2013-2015 Malibu and the 2016 Malibu Limited. If you have a 2016 Malibu, check whether it is badged as the Limited; QAA lists a separate rear bumper accent for the other Malibu sold from that year. A call clears up any doubt.
Years at a glance
Malibu: 2013, 2014, 2015. Malibu Limited: 2016. All are listed as the 4-door sedan, and the Limited appears on its own fitment line as well, so the data is consistent that it is included.
Rear trim for this sedan
- RD53105, a rear deck accent at 1.375 inches
- TP53105, a two-piece trunk accent listed at 2.5 inches high by 1.875 inches wide, between the lights
- LP53105, a license plate bezel
- GC53105, a gas door cover
Four rocker choices
The rocker lineup is unusually detailed. TH53108 is a two-piece on-the-rocker kit at 1.25 inches. TH53106 is a four-piece on-the-rocker kit at 2.5 inches. TH53105 is an eight-piece lower kit with a tapered width of 1.375 to 2.125 inches, spanning from the bottom of the door upward. TH53107 is a ten-piece kit that combines on-the-rocker and lower trim. DH53105 door handle trim, PP53105 and PP53106 pillar kits, and MC53105 mirror covers complete the list.
What it is
A decorative polished strip that adheres to the bumper cover. The bumper is not modified.
Material
26-gauge 304 stainless with a mirror polish. No plating, so no peeling.
Mounting
For the Malibu and Malibu Limited, the bumper trim mounts to the existing surface with 3M automotive-grade acrylic foam tape. According to QAA, that tape will hold for a lifetime with no harm to the Chevrolet.
Prep and fit
Wash and dry the bumper, then wipe the spot with a residue-free cleaner. Touch up any chips first. Dry-fit with the liner on, measure from each end to the bumper corners, and mark the line. If the deck accent and trunk pieces are going on too, install those first and use them to center this one.
Install day
Work on a dry, mild day. Peel the liner, set the trim on your marks, and press firmly from the center to the ends. Wait a few days before washing. The Installation tab lists every step.
Care
Mild soap, water, soft towel. No abrasive pads or polishing grit on the mirror face.
Planning around the trunk accent
The TP53105 trunk accent lists both a height and a width, which makes it easy to picture. Installing it along with the deck accent and this bumper trim layers three polished elements at the back of the sedan.
Why it matches
Before mixing rear, side, and mirror trim, check each listing for its finish, since this sheet describes only this piece.
Part details
SKU RB53105, UPC 691821602261. Call Quality Automotive Trims at 877-752-3811 to confirm your Malibu or Malibu Limited.
RB53105 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB53105 |
| UPC | 691821602261 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2015 Chevrolet Malibu and 2016 Chevrolet Malibu Limited |
Fitment: RB53105
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Malibu | 2013-2015 | 4-door, Sedan |
| Chevrolet Malibu Limited | 2016 | 4-door, Sedan |
| Chevrolet Malibu | 2013-2015 | 4-door, Sedan, Limited |
| Chevrolet Malibu Limited | 2016 | 4-door, Sedan, Limited |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet Malibu
- DH53105: 4-piece Door Handle Accent Trim
- PP53106: 6-piece Pillar Post Trim
- TH53105: 8-piece Rocker Panel Trim, Lower Kit
- TH53106: 4-piece Rocker Panel Trim, On the rocker
- GC53105: 1-piece Gas Door Cover Trim
- LP53105: 1-piece License Plate Bezel
- PP53105: 4-piece Pillar Post Trim
- RD53105: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB53105 Rear Bumper Trim Accent
Does RB53105 fit the 2016 Malibu Limited?
Yes. The fitment lists the Malibu 2013 through 2015 and the Malibu Limited for 2016.
How many pieces?
One.
What rear trim pairs with it?
RD53105 rear deck accent, TP53105 trunk accent, LP53105 license plate bezel, and GC53105 gas door cover.
Which rocker kit should I choose?
The catalog lists four: TH53108, TH53106, TH53105, and TH53107. Compare the photos or call 877-752-3811.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
