Product Description
Chevrolet HHR 2006-2011 Rear Hatch Accent, 3.188-Inch Polished Stainless (RD46140)
RD46140 is a wide, single strip for the back of the Chevrolet HHR, which QAA lists as a 4-door wagon, model years 2006 through 2011. It measures 3.188 inches across and is cut from mirror-polished 304 stainless steel in the USA. 3M tape holds it over the existing surface.
Six HHR years
2006, 2007, 2008, 2009, 2010, and 2011, wagon body. Check the registration or door jamb label to confirm your year before ordering.
On the rear gate
QAA's part name is rear deck accent. The HHR is listed as a wagon, so this strip goes on its rear gate. At a little over three inches, it is a bold band of metal there. The catalog gives no length; the photos show the span.
Four linked parts
- LP46140, a license plate bezel, 8.125 inches wide
- PP46140, a two-piece pillar kit
- TH46140, a 4.33-inch lower rocker kit in four pieces that sits on the doors alone, reaching up from each door's bottom edge
- SGR46140, a six-piece "HHR LIMITED" logo decal with bowtie emblem, linked letters, set of two
A decal note to check
The SGR46140 listing also mentions a "Chrysler wings emblem," which does not fit with a bowtie emblem on a Chevrolet. Call before ordering the decal so you know exactly what comes in the set.
Broad pieces on both ends of the list
The rear strip is just over three inches and the rocker kit is 4.33 inches. A wagon wearing both carries wide bands of trim on the sides and at the back, which suits owners who want the trim to be noticed.
Stainless, not plated
The strip is 26-gauge 304 stainless with a mirror finish. With no plating on the surface, the broad face cannot blister or peel.
Tape that comes ready
Installing the HHR accent takes only 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime and leave the Chevrolet wagon unmarked.
Preparing the gate
An HHR from these years has had many seasons on its paint. Wash and dry the gate, then go over the full 3.188-inch band, with a little margin, using a residue-free cleaner. Look for faded or lifting clearcoat in daylight and repair it before you start; wide tape needs sound paint across its whole width.
Setting it straight
Leave the liner on and hold the strip where the photos place it. Measure from each end to the gate edges and run painter's tape along both long edges. Close the gate and look from behind. On a dry, mild day, peel and press from the center out, then press firmly along both edges.
Fitting the bezel
Once the strip is set, center LP46140 under it by measuring down from each end.
Care
Wait a few days before the first wash. Then mild soap and a soft cloth, and dry the gate afterward.
Part details
SKU RD46140, UPC 691821467709. Call Quality Automotive Trims at 877-752-3811 about the decal set or fit.
RD46140 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD46140 |
| UPC | 691821467709 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 3.188" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2011 Chevrolet HHR |
Fitment: RD46140
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet HHR | 2006-2011 | 4-door, Wagon |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2006-2011 Chevrolet HHR
- LP46140: 1-piece License Plate Bezel
- PP46140: 2-piece Pillar Post Trim
- SGR46140: 6-piece "HHR LIMITED" Logo Decal with bowtie Emblem
- TH46140: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD46140 Rear Deck Accent
Which vehicle does RD46140 fit?
The Chevrolet HHR 4-door wagon, 2006 through 2011.
How wide is it?
3.188 inches.
Is there a license plate bezel?
Yes, LP46140, 8.125 inches wide.
What comes with the SGR46140 decal set?
It is listed as an "HHR LIMITED" decal with bowtie emblem, but the note also mentions a Chrysler wings emblem. Call to confirm.
How does it mount?
With 3M automotive-grade acrylic foam tape.
