Product Description
Kia Sorento 2011-2013 Rear Deck Accent, 1.625 x 45 Inches, Stainless (RD11820)
RD11820 is a single polished stainless steel accent for the rear liftgate of the Kia Sorento 4-door SUV, model years 2011, 2012, and 2013. The catalog gives both dimensions: 1.625 inches wide and 45 inches long. It is made in the USA from 304 stainless and mounts with 3M tape.
Measure it on your SUV
Because the length is listed, you can test the fit before ordering. Mark 45 inches on a strip of painter's tape and lay it across the liftgate where you picture the accent. Step back and check how it looks from behind the vehicle. That two-minute test tells you more than any photo.
Three model years
The record covers 2011 to 2013 only, for the 4-door SUV. Confirm your year on the registration before ordering, since a Sorento outside that window is not on this listing.
A short lineup
Only one other QAA piece is linked to this Sorento: LP11820, a license plate bezel. Pairing the two gives the back of the SUV a long polished line and a plate frame below it; check the bezel's listing for its finish.
What a rear deck accent is
QAA uses "rear deck" and "trunk lid" for the panel at the back of the vehicle. On the Sorento, that is the liftgate. The accent is a decorative strip that adheres to it.
Material
26-gauge 304 stainless steel with a mirror polish. The finish is the steel itself, so it will not flake like plating.
Mounting
The 1.625" by 45" Sorento accent goes over the existing surface with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime without harming the 2011-2013 Kia SUV.
Handling a 45-inch strip
A long accent is easiest with two people, one at each end. Clean the full length first: wash, dry, and wipe with a residue-free cleaner. On an SUV of this age, look closely for chips or faded clear coat along the line and repair them before installing.
Install
Dry-fit with the liner on. Measure from each end to the liftgate edges, adjust until the gaps match, and run masking tape along the top edge. On a dry, mild day, peel the liner, lower the accent onto the marks together, and press from the middle outward to both ends. Wait a few days before washing. The Installation tab has the complete steps.
Care
Mild soap, water, and a soft cloth. Avoid abrasive pads and gritty compounds, which scratch a mirror finish. Drying the accent after a wash keeps water spots from dulling a long, wide polished surface like this one.
Before ordering
Confirm the year, run the painter's tape test, and read the bezel's listing if you plan to fit it.
Why the bezel is worth fitting
With only two linked pieces, the rear is quick to finish. Ordering the bezel with this accent means one prep session and a coordinated look; check the bezel's listing for its finish.
Part details
SKU RD11820, UPC 691821453061. Call Quality Automotive Trims at 877-752-3811 if you have any questions about fitment or the measurements.
RD11820 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD11820 |
| UPC | 691821453061 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.625" |
| Coverage / notes | 1.625" Width X 45" length |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2011-2013 Kia Sorento |
Fitment: RD11820
| Vehicle | Years | Body style |
|---|---|---|
| Kia Sorento | 2011-2013 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2011-2013 Kia Sorento
- LP11820: 1-piece License Plate Bezel
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD11820 Rear Deck Accent
What size is RD11820?
1.625 inches wide by 45 inches long.
Which Sorento years does it fit?
The Kia Sorento 4-door SUV, 2011 through 2013.
How many pieces?
One.
What pairs with it?
LP11820, a license plate bezel.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
