Product Description
Chrysler 300 2011-2015 Rear Deck Accent, 1-Inch Polished Stainless (RD51760)
The Chrysler 300 sedan from 2011 through 2015 is the fit for RD51760, a one-inch-wide rear deck accent in mirror-polished 304 stainless steel. One piece, made in the USA, mounted by 3M tape over the existing paint.
Years and body
Chrysler 300, 4-door sedan, model years 2011, 2012, 2013, 2014, 2015. The deck accent's fitment carries no trim exclusions.
The rocker kit's S Model note
The linked part is TH51761, a four-piece rocker trim that installs on the rocker below the door, 3.625 to 4.375 inches wide. Its listing says it does not fit the S Model. That restriction belongs to the rocker kit, not to this trunk strip. If you have a 300 S and want side trim, call before ordering.
Proportion check
The rocker kit is a tall band of steel, and this trunk accent is a slim one-inch line. Whether that contrast suits you is a matter of taste. Tape out both widths and look before deciding.
What the strip is
A rear deck accent is a decorative strip; it doesn't replace any factory part. This one is 26-gauge 304 stainless, polished to a mirror, with no plating.
Adhesive details
The 1" Chrysler 300 accent goes on with 3M automotive-grade acrylic foam tape, which QAA says will hold for a lifetime without harming the sedan.
Before the tape touches paint
Wash the trunk and dry it. Wipe the area where the strip goes with a residue-free cleaner, then again with a fresh cloth, until nothing transfers. If you see peeling clearcoat or chips, repair them first.
Measure twice
With the liner on, set the strip where the photos show it. Measure from each end to the lid edges, adjust until equal, and mark with painter's tape. Look at it from directly behind the car before committing.
Stick once
On a dry, mild day, peel the liner, line up the strip, and press from the center outward to both ends. The Installation tab spells out the steps.
Caring for it
Skip washing for a few days. Then use mild soap and a soft cloth, and avoid abrasive polishes on the mirror finish.
Why stainless
A light scratch on solid 304 shows more steel, not another layer. If you fit the rocker kit as well, check its listing for its finish so the trunk line and the side band match the way you want.
Only one linked part
The 300 record ties just the rocker kit to this strip. No pillar, bezel, or wheel well parts are linked here, so call if you're looking for other trim for the car.
Light and temperature
Work in shade or a garage. A lid that's hot from the sun or cold from the night won't give the tape its best bond, and even light makes it easier to see whether the strip is straight.
Ordering
Confirm the year. If you're buying the rocker kit, confirm you don't have the S Model.
Part details
For the 2011-2015 Chrysler 300, RD51760 (UPC 691821631179) is the deck accent, and 877-752-3811 takes questions.
RD51760 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD51760 |
| UPC | 691821631179 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2011-2015 Chrysler 300 |
Fitment: RD51760
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler 300 | 2011-2015 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2011-2015 Chrysler 300
- TH51761: 4-piece Rocker Panel Trim, On the rocker
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD51760 Rear Deck Accent
Which Chrysler 300 does RD51760 fit?
The 4-door sedan, 2011 through 2015.
Does it fit the S Model?
The deck accent's fitment has no S Model exclusion. The TH51761 rocker kit does not fit the S Model.
How wide is it?
1 inch.
Is there matching side trim?
TH51761, a four-piece rocker trim, 3.625 to 4.375 inches.
How is it installed?
It mounts with 3M acrylic foam tape.
