Product Description
Lincoln Corsair 2020-2026 Liftgate Accent, 1.375-Inch Polished Stainless (RD60610)
At the rear of a Lincoln Corsair, the liftgate is a broad surface for an accent. RD60610 runs one polished line across it: a single strip of 304 stainless steel, 1.375 inches wide, cut for the Corsair 4-door SUV from 2020 through 2026. QAA catalogs this part as a rear deck accent; on the Corsair that means the rear liftgate.
A little over an inch and a third
That width is enough to read clearly from a car length back without turning the gate into a billboard. To see it on your own vehicle first, lay a strip of painter's tape about that wide across the gate where the product photos place the accent, then walk to the curb and look.
What the record says about the metal
The strip is 26-gauge 304 stainless, polished to a mirror and made in the USA. It is the metal itself that shines, so there is no plating layer on top.
Mounting without tools
3M automotive-grade acrylic foam tape holds it, and it installs over the existing surface. No clips, no panel removal. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
The bumper piece below it
RB60610 is a one-piece rear bumper trim accent for the same Corsair. The data gives no width for it, so compare the two sets of photos if you want to know how the upper and lower lines will relate. Check that listing for its finish as well.
Other Corsair parts in the record
- RW60610: two-piece rear window trim
- LP60610: license plate bezel
- GC60610: gas door cover trim
- DH60610: four-piece door handle accent
- TH60610: eight-piece upper rocker kit, 2.875 to 3.875 inches, spanning down from the bottom of the molding
- PP60610, PP60611, PP60612: pillar kits in four, six, and eight pieces, each including the keyless entry touch pad
Each of those is its own listing with its own photos, so check each one for its finish before planning a full set.
Order of work if you buy several
Start at the top of the rear: window trim first, then this gate accent, then the bumper strip and bezel. Each piece becomes a reference for the next.
Preparing the gate
Wash the liftgate and let it dry fully. Wipe the strip's footprint with a residue-free cleaner, changing cloths until one comes away clean. Wax or sealant left on the paint weakens the bond more than anything else.
Placement
Hold the strip in position with its liner still on and compare it to the photos. Measure from each end to the gate edges; when the numbers agree, mark the top edge with low-tack tape. Peel the liner, set the center first, and press outward to both ends. A dry day in mild weather is best. The Installation tab lists the full steps.
After it's on
Leave it a few days before washing. Then mild soap and a soft cloth keep the polish bright; skip abrasive pads and compounds.
Questions
SKU RD60610, UPC 691821612499. Call Quality Automotive Trims at 877-752-3811 if you want help confirming fit or comparing photos.
RD60610 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD60610 |
| UPC | 691821612499 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.375" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2026 Lincoln Corsair |
Fitment: RD60610
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln Corsair | 2020-2026 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2026 Lincoln Corsair
- PP60610: 4-piece Pillar Post Trim
- PP60611: 6-piece Pillar Post Trim
- PP60612: 8-piece Pillar Post Trim
- RB60610: 1-piece Rear Bumper Trim Accent
- TH60610: 8-piece Rocker Panel Trim, Upper Kit
- RW60610: 2-piece Rear Window Trim
- GC60610: 1-piece Gas Cap Door Trim
- LP60610: 1-piece License Plate Bezel
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD60610 Rear Deck Accent
Which vehicle does RD60610 fit?
The Lincoln Corsair 4-door SUV, model years 2020 through 2026.
How wide is the strip?
1.375 inches.
Is there a bumper piece for the Corsair?
Yes, RB60610 is a one-piece rear bumper trim accent for the same SUV. Check its listing for details and finish.
Does any trim on the Corsair's hatch have to come off?
No. It mounts over the existing surface with 3M tape.
Where does it go on an SUV?
QAA calls it a rear deck accent; on the Corsair it goes on the rear liftgate.
