Product Description
Nissan Rogue 2021-2026 Stainless Rear Emblem Half-Round Trim, 2 Pieces (EMB71535)
EMB71535 is a small, specific accent: a two-piece polished stainless rear emblem trim for the Nissan Rogue SUV, model years 2021 through 2026. The title describes it as a half round trim for the rear Nissan emblem. It's made in the USA from 304 stainless steel at 26 gauge.
What it is
Rear emblem trim frames or accents the badge area. The title calls this one "half round," and there are two pieces. Beyond that, the catalog doesn't describe how the two pieces sit around the emblem, so the product photos are the reference. Compare them with the back of your Rogue before ordering, and call if you'd like to confirm. Have a question about the Rogue? Phone 877-752-3811 and ask about EMB71535.
Fitment
One row: Nissan Rogue, 2021-2026, 4-door SUV. This row doesn't carry an exclusion, but several related listings below do, so pay attention to those if you're buying more than one piece. The Fitment tab shows the row.
Related Rogue trim and the Sport note
Cross-listed for the same Rogue:
- PP71535 and PP71536, pillar post trims in four and six pieces.
- GC71535, gas door cover trim. Does not fit Sport.
- LB71535, a license bar above the plate. Does not fit Sport.
- TH71535, a four-piece lower accent trim. Does not fit Sport.
- RD71535, a rear deck lid accent. Does not fit Sport.
- RW71535, a two-piece rear window trim. Does not fit Sport.
DH71535 is listed too; its details are on its own page. The "Does not fit Sport" tag is on those listings, not on this emblem trim.
Material and mounting
Polished 304 stainless at 26 gauge, bright because the steel itself is polished. Both pieces have 3M automotive-grade acrylic foam tape and install directly over the existing surface, with no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Prep around the badge
Emblem areas trap wax and grime along their edges. Wash the area, rinse, then degrease carefully around the badge, using a soft brush or cotton swab to get into the edges. Let it dry completely.
Placing small pieces
Small parts are all about alignment, since the eye notices if they're even slightly off-center. Hold each piece in place with the liner on, check it from a few steps behind the SUV, and mark the position with small strips of painter's tape. Peel, align, and press firmly over the whole piece; press again after a minute. Check that the trim looks even all the way around the emblem. The Installation tab covers prep in detail.
Why the emblem
The rear badge is one of the first things people see when following or walking behind the vehicle. Framing it in polished steel makes it stand out.
After
Install on a dry, mild day and keep it dry overnight.
Care
Mild soap and a soft cloth. No abrasives.
Questions
Call Quality Automotive Trims at 877-752-3811 and mention EMB71535. The UPC is on the Specs tab.
EMB71535 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | EMB71535 |
| UPC | 840251602451 |
| Part type | Rear Emblem Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2021-2026 Nissan Rogue |
Fitment: EMB71535
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Rogue | 2021-2026 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2021-2026 Nissan Rogue
- PP71535: 4-piece Pillar Post Trim
- PP71536: 6-piece Pillar Post Trim
- GC71535: 1-piece Gas Door Cover Trim
- LB71535: 1-piece License Bar, Above plate accent Trim
- TH71535: 4-piece Lower Accent Trim
- RD71535: 1-piece Rear Deck Accent
- RW71535: 2-piece Rear Window Trim
- DH71535: 1-piece Tailgate Handle Accent Trim Surround
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Emblem Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: EMB71535 Rear Emblem Trim
What does EMB71535 fit?
The 2021-2026 Nissan Rogue 4-door SUV.
How many pieces?
Two rear emblem trim pieces.
Does it fit the Rogue Sport?
This listing has no Sport exclusion, but several related Rogue listings say they do not fit Sport. Call 877-752-3811 to confirm for your vehicle.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
