Product Description
Audi 100 & A6 Sedan/Wagon Full Length Rocker Kit TH92625, 4.75"-5.375" Tapered, 12 Pieces
TH92625 is a twelve-piece polished stainless steel Full Kit for the Audi 100 (1992-1994) and the A6 Sedan and A6 Wagon (1992-1997), with fitment rows tagged "4-door, Sedan" and "4-door, Wagon." The width tapers from 4.75" to 5.375", and the note reads "Full Length, Includes coverage from the wheel to the bumper, front and rear."
Wheel to bumper
The note says "from the wheel" rather than naming the wheel well. We read it as written and don't assume more. What it does say is that coverage runs to the bumper at the front and at the rear, on top of the molding-to-door-bottom placement.
Twelve pieces against eight
The linked TH92624 shares the tapered width and fitment, with eight pieces and no length note. This kit has four more pieces and the Full Length coverage. If you want the trim to carry on toward both bumpers, this is the listing that says so.
Model and body
The title carries the 1992-1994 Audi 100 and the 1992-1997 A6 names, as the fitment does. Both rows list all three model names, one for the sedan and one for the wagon. Give us your model, year and body when you call 877-752-3811.
Measuring a taper
Measure from the molding to the door bottom at the front and rear of every door, and near each end of the car. Readings should fall within 4.75" to 5.375". The record doesn't say which end of each piece is the wider, so let your measurements and the photos guide orientation.
Material
All twelve Audi pieces are made in the USA from polished 26 gauge 304 stainless steel and attach over the existing paint with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime without causing damage to the surface.
Prep end to end
- Wash the full length below the molding
- Clear wax from the Audi's lower body with wax-and-grease remover
- Clean around the wheel openings
- Fix any chips or rust, then finish with an isopropyl wipe
Sorting twelve tapered pieces
Label each liner with side, position and which end faces forward. Check each piece's orientation against the photos during the dry fit.
Fitting
Dry fit the door pieces first, then work out toward each bumper. Open every door. Bond in short liner sections with firm pressure.
Conditions
Give it time on a mild, dry, shaded day; skip the first wash until the next day.
Molding the whole way
Every piece meets the molding along its top edge, so it needs to be secure along the full length you will cover, including toward each bumper. Repair any loose or cracked section before fitting.
Holding the Audi line
Copy the first Audi run's gaps and the direction of each taper on the second.
Complete a run on the Audi, then look along it from the front bumper and the rear bumper before carrying on.
While sorting the twelve pieces, rest them on a soft towel to protect the polish, and hold on to the box until the final piece is fitted.
Audi 100 / A6 Full Length kit TH92625, UPC 691821282852. Phone 877-752-3811.
TH92625 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH92625 |
| UPC | 691821282852 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.75" to 5.375" tapered |
| Coverage / notes | Full Length, Includes coverage from the wheel to the bumper, front and rear; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1994 Audi 100, 1992-1997 Audi A6 Sedan and 1992-1997 Audi A6 Wagon |
Fitment: TH92625
| Vehicle | Years | Body style |
|---|---|---|
| Audi 100 | 1992-1994 | 4-door, Sedan |
| Audi A6 Sedan | 1992-1997 | 4-door, Sedan |
| Audi A6 Wagon | 1992-1997 | 4-door, Sedan |
| Audi 100 | 1992-1994 | 4-door, Wagon |
| Audi A6 Sedan | 1992-1997 | 4-door, Wagon |
| Audi A6 Wagon | 1992-1997 | 4-door, Wagon |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Audi 100
- TH92624: 8-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH92625 Rocker Panel Trim, Full Kit
Does TH92625 fit the Audi A6 wagon?
The fitment lists the A6 Wagon for 1992-1997, alongside the A6 Sedan and the 1992-1994 Audi 100.
How far does it reach?
The note says Full Length, from the wheel to the bumper, front and rear.
How wide is it?
Tapered, 4.75" to 5.375".
How many pieces?
Twelve.
