Product Description
Honda CR-V 2002-2006 Upper Kit With Trim Crease, 2.563" Below the Molding, Four Pieces (TH25235)
Quality Automotive Trims lists one rocker-panel kit for the 2002-2006 Honda CR-V: TH25235, four pieces of polished stainless steel, 2.563" wide. It's an Upper Kit, so it hangs from the molding ("Spans from the bottom of the molding DOWN to the specified width"), and it's noted "With trim crease."
Quick facts
- Four pieces
- 2.563" width, just over two and a half inches
- Upper Kit, from the bottom of the molding down
- With trim crease
- Honda CR-V 4-door SUV, 2002 to 2006
Is the molding still there?
This is the first thing to check. An Upper Kit's top edge rides against the bottom of the side molding, so the molding has to be present, straight and tight. If yours has been removed or replaced with something different, call 877-752-3811 before buying.
The crease
The listing mentions a trim crease and leaves it there. Study the product photos to see how the crease looks on the vehicle and hold that picture up against your own CR-V's lower doors. Any mismatch is a reason to call first.
Nothing else linked
No other parts are attached to this listing. If you want pillar or window trim for the CR-V too, ask what's available when you call.
What it's made from
The four creased 2.563" CR-V strips are USA-made polished 26 gauge 304 stainless, set below the molding with 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime with no harm to the 2002-2006 Honda SUV.
Four pieces, four doors?
The record doesn't assign pieces to doors. It's tempting to assume one per door, but use the photos to confirm, and label each liner before you start.
Getting the paint ready
Wash the lower doors and dry them well. On an SUV of this age, run your fingertips over the band below the molding; if it feels gritty, use a clay bar. Repair chips, polish dull areas, and finish with an isopropyl alcohol wipe, reaching right up under the molding lip.
Putting it on
Test each piece with its liner on: top edge snug to the molding, crease where the photos show it, ends clear of the door gaps. Open and close every door. Then peel from the top a few inches at a time, pressing down and outward to push out air.
Ends against the wheel openings
Once two pieces are on, note where each end sits relative to its wheel opening and keep the other two consistent with the photos.
Kit list
Soap, clay bar, polish, isopropyl alcohol, lint-free cloths, painter's tape and a tape measure.
The first day
Install in mild, dry weather and keep it out of the rain and washes for about a day.
Long-term care
Rinse salt off in winter, dry the steel after washing, and use only a non-abrasive metal polish.
Tip: if a corner lifts after pressing, push it down again with a soft cloth.
Questions about your CR-V? Call Quality Automotive Trims at 877-752-3811. SKU TH25235, UPC 691821666126.
TH25235 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH25235 |
| UPC | 691821666126 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2.563" |
| Coverage / notes | With trim crease; Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2002-2006 Honda CR-V |
Fitment: TH25235
| Vehicle | Years | Body style |
|---|---|---|
| Honda CR-V | 2002-2006 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH25235 Rocker Panel Trim, Upper Kit
Where does TH25235 sit?
From the bottom of the side molding down 2.563".
Does it have a crease?
The listing says "With trim crease." See the photos.
Which CR-V years fit?
2002 through 2006, 4-door SUV.
How many pieces?
Four.
Are there other CR-V parts linked?
Not on this listing. Call 877-752-3811 to ask.
