Product Description
Tacoma Double Cab 5' Bed 2016-2023 Stainless Full Kit Below the Molding, 8"-8.375", 4 Pieces (TH16174)
TH16174 covers the lower body of a 2016-2023 Toyota Tacoma Double Cab with the 5' bed, from the underside of the molding down to the bottom edge of the doors. QAA calls it a Full Kit. There are four pieces of polished stainless steel, and the listed width is "8" - 8.375" tapered," which is the height of the band each piece fills.
What "Full Kit" means in this listing
QAA's rocker panel trim comes in several types. A Lower Kit starts at the bottom of the door and rises a set amount; an Upper Kit hangs down from the molding. This Full Kit's note joins both reference points: it "Spans from the bottom of the molding to the bottom of the door." So it's sized to fill the whole gap between those two edges, roughly eight inches on this truck.
Double Cab, 5' bed
Order carefully. TH16175 is the Double Cab kit for the 6' bed, and it has eight pieces instead of four. The Access Cab has its own two kits as well (TH16172 and TH16173). The record doesn't explain what the further pieces on the long-bed versions cover; a call to 877-752-3811 settles it.
Quick check
Measure from the bottom of the molding to the bottom of a door. You should see a figure between 8" and 8.375". If not, stop and call before ordering.
Built from
Tacoma rocker material is polished 304 stainless in 26 gauge, made in the USA.
Held by
The Double Cab's four pieces bond over the existing surface with 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime without damaging the Tacoma.
The insert kit for this truck
MI16174, a four-piece body molding insert kit w1.5, is listed for the same Double Cab, 5' bed. The data doesn't describe how it sits relative to this kit; compare photos before buying both.
Clean a big area well
Eight inches of tape across each panel is a lot of contact. Wash, rinse and dry the lower body, then wipe everything from the door bottoms up to the molding with isopropyl alcohol. Fold the cloth often.
Install in order
Label the four pieces from the photos. Hold each in place with its liner on, top edge tucked to the molding and bottom edge at the door's lower edge. Open the door to confirm the edges clear. Peel the liner from one end gradually, pressing across the full height as you go, then go over the whole piece again.
Plan the day
Warm and dry, or inside a garage. Leave the truck unwashed for about a day.
Also for this Tacoma
PP16175 Double Cab pillars, RW16176 power sliding rear window accents (power slider with privacy glass required) and RW16175 (non-power slider required), RT16175 tailgate accent, SGR16175 "TACOMA" letters and RC16175 radiator cover. Check each listing for its finish.
Care
Rinse off mud and road salt; dry the panels with a soft towel to prevent spots.
For Tacoma kit TH16174 (UPC 691821747573), call Quality Automotive Trims at 877-752-3811.
TH16174 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH16174 |
| UPC | 691821747573 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 8" to 8.375" tapered |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2023 Toyota Tacoma |
Fitment: TH16174
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Tacoma | 2016-2023 | 4-door, Double Cab, 5' Bed |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2023 Toyota Tacoma
- PP16175: 4-piece Pillar Post Trim
- PP16172: 4-piece Pillar Post Trim
- RT16175: 1-piece Tailgate Accent Trim
- SGR16175: 6-piece "TACOMA" Tailgate Letter Inserts
- RW16175: 2-piece Sliding Rear Window Trim Accents
- TH16172: 6-piece Rocker Panel Trim, Full Kit
- TH16173: 4-piece Rocker Panel Trim, Full Kit
- TH16175: 8-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH16174 Rocker Panel Trim, Full Kit
Which Tacoma fits TH16174?
2016 through 2023 Double Cab with the 5' bed.
What does it cover?
From the bottom of the molding to the bottom of the door, 8" to 8.375".
I have the 6' bed. Which kit?
TH16175, an eight-piece kit.
How many pieces?
Four.
How is it attached?
3M automotive-grade acrylic foam tape. Call 877-752-3811 with questions.
