Product Description
TH72145 Toyota Tundra Crew Cab 2022-2026 Door Insert Kit, 4 Pieces, 3 5/8", Fits the Body Indentation
TH72145 is a four-piece polished stainless steel insert kit for the 2022-2026 Toyota Tundra 4-door Crew Cab pickup. The record says it "fits inside indentation in body for the specified width," and the width bullet reads "3 5/8" Width, On the Doors only."
Inside the indentation
This isn't a kit that hangs from a molding edge or climbs from the door bottom. Its note places each piece inside an indentation in the body, on the doors only. The record doesn't describe the indentation, so compare the photos with your Tundra's doors. If any door has been repaired or reshaped low down, send a photo to 877-752-3811 before ordering.
The width figure
The bullet says 3 5/8", and the Specs tab shows the same width. A linked part is much slimmer: RW72145, a rear window accent, has a note of "5/8" Width." Call us if the exact figure matters before you order.
Material
The four Tundra Crew Cab door pieces are polished 26 gauge 304 stainless steel made in the USA, set inside the body indentation with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without damaging the 2022-2026 Toyota.
Three sets of TUNDRA letters
The linked list includes three six-piece letter sets, each noted "Stainless Letters":
- SGR72145: tailgate letter inserts
- SGR72146: front bumper letter inserts
- SGR72147: top of tailgate letter inserts
Two are for the tailgate, so check the photos to see which spot each one fits.
Other Tundra parts
PP72145 (four-piece pillars) and PP72146 (six, "Includes Rear of Rear door piece"), WS72145 (Crew Cab sills), DH72145 (door handle inserts), RT72145 (4" tailgate accent) and GC72145. Check each listing for its finish.
Clean the recess
Dirt settles in a body indentation. Wash with soapy water and a soft brush, rinse well, dry fully, and wipe the recess with isopropyl alcohol.
Dry fit
Hold each piece in its indentation with painter's tape. Check that it sits within the recess along its full length and that the doors open freely.
Bond
Peel the liner a few inches at a time and press the piece into place. Go over it again with firm pressure.
Tundra insert line
Measure the Tundra positions at the door gaps and repeat them on each piece.
Before ordering
Confirm the year (2022-2026) and the Crew Cab. A side photo sent to 877-752-3811 lets us check the indentation against the kit.
Why polished 304
Pickup doors take spray and grit low down. QAA uses polished 304 stainless steel for this kit, and its mirror surface rinses clean with mild soap. Work on a mild, dry day in shade and wait a day before washing.
Tools: painter's tape, a tape measure, isopropyl alcohol, a soft brush and lint-free cloths.
If you also want the TUNDRA letters, tell us which spots you have in mind when you call.
8-inch Tundra kit TH72145 (UPC 840251601850): dial Quality Automotive Trims at 877-752-3811.
TH72145 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH72145 |
| UPC | 840251601850 |
| Part type | Rocker Panel Trim, Insert Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 3 5/8" |
| Coverage / notes | 3 5/8" Width, On the Doors only; Fits inside indentation in body for the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2022-2026 Toyota Tundra |
Fitment: TH72145
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Tundra | 2022-2026 | 4-door, Pickup Truck, Crew Cab |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2022-2026 Toyota Tundra
- PP72145: 4-piece Pillar Post Trim
- PP72146: 6-piece Pillar Post Trim
- GC72145: 1-piece Gas Door Cover Trim
- WS72145: 4-piece Window Sill Trim Set
- RW72145: 1-piece Rear Window Accent Trim Kit
- DH72145: 1-piece Door Handle Insert Trim Kit
- RT72145: 1-piece Tailgate Accent Trim
- SGR72145: 6-piece Graphic/Logo/Emblem
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Insert Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH72145 Rocker Panel Trim, Insert Kit
Where does TH72145 install?
Inside the indentation in the body, on the doors only.
How wide is it?
The bullet says 3 5/8", as the Specs tab shows. Call 877-752-3811 to confirm.
Which Tundra?
2022-2026, 4-door Crew Cab pickup.
How many pieces?
Four.
