Product Description
Ford Taurus X 2008 Side Molding Accent Trim, 4-Piece Polished Stainless (AT48355)
The Ford Taurus X was a short-lived crossover, and QAA's AT48355 is cut for a single model year of it: 2008. It is a four-piece body side molding accent in polished stainless steel, 1" wide, made for the 4-door Taurus X crossover SUV. If you own one of these, you already know that trim made specifically for it is not easy to find. This kit puts a clean, bright line along the doors of the Taurus X without any guesswork about fit.
One year, one body style
QAA lists AT48355 for the 2008 Taurus X, 4-door crossover SUV, and nothing else. That makes the fitment check easy but also important. Check the Taurus X's model year on its registration or title before you order, since these four strips are listed only for the years shown in the fitment row. The Taurus sedan is a different vehicle and is not part of this listing, and neither are other Ford crossovers. When you phone 877-752-3811 about your Taurus X, quote AT48355.
Four strips, one inch wide
The kit contains four pieces. QAA does not publish where each piece goes or how long it is, so use the product photos to see the layout on the vehicle, and keep them open while you install. Each strip is a full inch wide, which reads from across a parking lot without looking oversized on a family hauler.
Material
Every piece is made in the USA from 26-gauge 304 stainless steel and polished to a mirror shine. Stainless is chosen for brightwork because the finish is in the metal rather than a plated layer. Grade 304 is one of the most common stainless alloys, and 26 gauge is the sheet thickness QAA uses.
Installation
The back of each strip comes with 3M automotive-grade acrylic foam tape already applied. The trim installs directly over the existing surface of the doors, so there is no drilling and no removal of factory parts. QAA states the tape will hold for a lifetime without causing any damage to the vehicle's surface. Wash the doors, dry them completely, and wipe the mounting line with a clean cloth. Hold each strip in position to confirm the line before peeling the backing, then press firmly along its length. The Installation tab has the step-by-step.
Only part cataloged for this vehicle
In the QAA catalog data we have, this side accent is the only part listed for the 2008 Taurus X. It's a simple way to put stainless brightwork on this crossover, and because it's doors only, one person can do it in an afternoon. If you are looking for other trim for the same vehicle, give us a call and we can tell you what is available.
Questions
Call Quality Automotive Trims at 877-752-3811 with your year and model. We will confirm the fit and answer any questions before you order. Part number AT48355, the UPC, and the full specifications are in the Specs tab, and short answers are in the FAQ tab.
AT48355 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT48355 |
| UPC | 691821568222 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1" |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2008 Ford Taurus X |
Fitment: AT48355
| Vehicle | Years | Body style |
|---|---|---|
| Ford Taurus X | 2008 | 4-door, Crossover SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT48355 Body Side Molding Accent Trim
What vehicle does AT48355 fit?
The 2008 Ford Taurus X, 4-door crossover SUV.
Does it fit the Taurus sedan?
No. It is listed only for the Taurus X crossover.
How many pieces, and how wide?
Four pieces, 1" wide.
Is it stainless or plated plastic?
Polished 26-gauge 304 stainless steel, made in the USA.
How is it mounted?
Pre-applied 3M acrylic foam tape over the existing surface, no drilling. QAA states the tape will hold for a lifetime without damaging the surface.
Who do I call with questions?
Quality Automotive Trims, 877-752-3811.
