Product Description
Silverado 1500 Crew Cab 5.5' Bed Tapered Side Accent, 8-Piece Stainless, 2019-2026 (AT59170)
AT59170 is a bold piece of brightwork for the 2019-2026 Chevrolet Silverado 1500. QAA describes it as "Tapered Width from a point - 3.5"," which means each accent starts at a fine point and widens to three and a half inches. Eight pieces of polished stainless steel run that sweeping shape along the body of the 4-door Crew Cab with the 5.5' bed. On a full-size pickup with big, flat flanks, the effect is a dramatic flash of steel that grows as it moves along the truck.
Exactly which Silverado
QAA cuts this design for four Silverado 1500 configurations, and each one is a separate kit. This one requires all of the following:
- Silverado 1500, model years 2019 through 2026.
- Crew Cab pickups with four doors.
- 5.5' bed.
For the Crew Cab with the 6.5' bed, choose AT59171. For the Double Cab, QAA lists AT59175 with the 6.5' bed and AT59176 with the 5.5' bed. All four share the same eight-piece count and taper, but the bed length and cab change the body side, so they are not interchangeable. Measure your bed floor if you are unsure.
Material
Every piece is made in the USA from 26-gauge 304 stainless steel and polished to a mirror shine. Because it is solid stainless, the finish is the metal itself rather than a plated layer, and it pairs well with a chrome grille, bumpers, or mirror caps. Grade 304 is a common stainless for exterior trim, and 26 gauge is the sheet thickness.
Installing a tapered accent
QAA pre-applies 3M automotive-grade acrylic foam tape, and the trim installs directly over the existing surface without drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface. A piece that runs from a point to three and a half inches needs careful placement, so dry-fit all eight and check the line from several steps back before you peel any liner. Wide sections have a lot of tape area, so clean and dry the panels thoroughly. A helper makes the long pieces easier. See the Installation tab.
Crew Cab companion trim
For the 2019-2026 Silverado 1500 Crew Cab, QAA lists a wide range: the six-piece TH59170 lower rocker kit, reaching from the door bottom up to 7.5"; pillar post kits of six, eight and ten pieces (the ten-piece has the front triangle); WP59170 (22 pieces, full), WP59171 (upper trim and sills) and WP59172 (upper trim only); and a six-piece window sill set with rear vertical trim. For any cab, there is a gas door cover, a 4" tailgate accent, a wheel well accent, wheel well fender trim moldings, and a tailgate handle cover with camera and sensor access. Links are in the Fitment tab.
Years
Eight model years, 2019 through 2026, all for the same Crew Cab short-bed configuration.
Questions
Phone Quality Automotive Trims at 877-752-3811 with your Silverado's year, cab and bed, and quote AT59170; Specs shows the UPC.
AT59170 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT59170 |
| UPC | 691821397334 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Tapered Width from a point - 3.5" |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2019-2026 Chevrolet Silverado |
Fitment: AT59170
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Silverado | 2019-2026 | 4-door, Pickup Truck, 1500, Crew Cab, 5.5' Bed |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2019-2026 Chevrolet Silverado
- PP59171: 6-piece Pillar Post Trim
- PP59172: 8-piece Pillar Post Trim
- PP59173: 10-piece Pillar Post Trim
- GC59170: 1-piece Gas Door Cover Trim
- WP59170: 22-piece Window Trim Package
- WP59171: 12-piece Window Trim Package
- TH59170: 6-piece Rocker Panel Trim, Lower Kit
- RT59170: 1-piece Tailgate Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 8 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT59170 Body Side Molding Accent Trim
Which Silverado does AT59170 fit?
The 2019 to 2026 Chevrolet Silverado 1500 Crew Cab, 4-door pickup with the 5.5' bed.
What does "tapered from a point" mean?
Each accent starts at a point and widens to 3.5".
I have the 6.5' bed. Which kit fits?
AT59171 is the Crew Cab 6.5' bed version.
Does it fit a Double Cab?
No. Double Cab trucks use AT59175 (6.5' bed) or AT59176 (5.5' bed).
What is it made of?
Eight pieces of polished 26-gauge 304 stainless steel, made in the USA.
How does it install?
Pre-applied 3M acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without damaging the paint.
