Product Description
Ford Flex 2013-2019 Tailgate Handle Accent in Polished Stainless, 2 Pieces (DH53340)
For the 2013-2019 Ford Flex, QAA makes DH53340, a two-piece stainless accent set for the liftgate handle. It is cut from 26-gauge 304 stainless steel, polished to a mirror finish and made in the USA. Both pieces attach with 3M automotive-grade acrylic foam tape and install directly over the existing surface.
An open-top ring and a floor piece
QAA describes the design precisely. The main piece is a "three sided partial ring trim - open on top," so it outlines both ends and the bottom of the handle opening and leaves the top edge bare. The second piece is a trim accent that "sits flush on the bottom surface of the concave of the door handle structure," which means it lies inside the recessed pocket behind the handle. One frames the opening; the other brightens the inside of it.
Why the open top matters
Because the ring is open on top, you should not expect a full loop of stainless around the handle. If you have seen a closed ring on another vehicle, the photos here will show the difference. Look at them before ordering so the result matches what you picture.
Fitment
Ford Flex, 4-door SUV, model years 2013 through 2019, seven years in all. The Fitment tab lists the row exactly.
Pair it with the hatch accent
QAA cross-lists TP53340, a 1pc trunk hatch accent trim for the same Flex. It is 2.25 inches wide and has a cut out for the "FLEX" characters, so the lettering on the liftgate stays visible through the stainless. Installed together, the hatch accent and this handle set put matching polished metal across the back of the SUV.
About the metal
Type 304 is one of the most widely used stainless grades. At 26 gauge it is thin, which helps the ring follow the edge of the handle opening and lets the floor piece sit flat. QAA polishes it for a bright, reflective surface. This is solid stainless rather than a plated finish.
Install sequence
For the Flex's two tailgate handle accents, QAA says the tape will hold for a lifetime with no damage to the vehicle's surface.
- Clean the handle opening and the recess with soap and water.
- Wipe both areas with degreaser, getting into the bottom of the pocket.
- Allow everything to dry completely.
- Set the flush floor piece first, pressing it flat against the bottom of the recess.
- Dry-fit the three-sided ring with its liner on, then peel and press it along all three sides.
The Flex liftgate pieces have their cleaning steps written out on the Installation tab.
Fingers and polish
Fingerprints show on polished stainless. Press the pieces through a clean microfiber cloth and they will look finished the moment you step back.
Conditions
Choose a mild, dry day out of direct sun, and keep the Flex out of rain overnight while the tape sets. Close the liftgate gently for the first day, and wait before the first wash. Wash the stainless later with mild soap and a soft towel rather than an abrasive pad.
Questions
Flex owners can call Quality Automotive Trims, 877-752-3811, about DH53340; the UPC is listed on Specs.
DH53340 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DH53340 |
| UPC | 691821668946 |
| Part type | Tailgate Handle Accent Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Three sided partial ring trim - open on top, includes second Trim Accent piece that sits flush on the bottom surface of the concave of the door handle structure |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2019 Ford Flex |
Fitment: DH53340
| Vehicle | Years | Body style |
|---|---|---|
| Ford Flex | 2013-2019 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2019 Ford Flex
- TP53340: 1-piece Trunk Hatch Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Tailgate Handle Accent Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DH53340 Tailgate Handle Accent Trim
Which Flex years does DH53340 fit?
The 2013-2019 Ford Flex 4-door SUV.
Is the ring a full circle around the handle?
No. QAA describes it as a three-sided partial ring that is open on top.
What is the second piece?
A trim accent that sits flush on the bottom surface of the handle's concave recess.
Do I need to drill?
No. It installs directly over the existing surface with 3M tape.
How long will the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
