Product Description
Ford Expedition 2018-2025 Stainless Wheel Well Accent Trim WQ58384, Model WITH Rocker Panels, 6 Pieces, 1.25" Wide
WQ58384 gives the 2018-2025 Ford Expedition 4-door SUV six polished stainless wheel well accent pieces, 1.25" wide, for models equipped WITH Rocker Panels. The record states it does not fit the "MAX" version and comes "With 3M adhesive installation and black rubber gasket edging".
Standard Expedition, with rocker panels
Two conditions apply. It does not fit the Expedition MAX, and it's listed for the model equipped WITH Rocker Panels. WQ58383 is its partner for the model WITHOUT them; otherwise the two read the same, six pieces at 1.25". Check your Expedition's lower sides against the photos of both. When it's not clear, a photo and a call to 877-752-3811 will settle it.
Material
The six Expedition pieces are made in the USA from polished 26 gauge 304 stainless steel and go on over the existing finish with 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime without damaging the SUV's surface.
Six pieces
The record doesn't list positions for the six; the photos do. Label every liner before starting.
Other Expedition parts
The group also has a tailgate handle accent (DH58383), a 0.625" rear bumper accent (BI58383) and RD58383, whose rear deck / trunk lid name is worth checking in its photos. There is no rocker kit in the group.
Before ordering
Year 2018-2025, standard length, rocker panels present.
Preparing the arches
Where the rocker panels sit near the lower ends of the arches, take care cleaning. Rinse each opening, shampoo, rinse and dry, then let it drain. Pass a lamp along each band down to its lower ends, removing wax, glue and chips. Wax-and-grease remover across the band; isopropyl alcohol right before each piece.
Fitting
- Lay the six pieces out by position from the photos.
- Hold one opening's pieces in place with painter's tape, liners on.
- Check the gasket line, any join, and how the lower ends sit beside the rocker panels.
- Bond from the top downward in short peel-and-press steps.
- Press firmly along the whole 1.25" and move to the next opening.
Arrival and care
Six pieces should be in the box. After they're fitted, give the Expedition until the next day before washing; then hand-wash with mild soap and a soft cloth, and keep a pressure washer away from the rubber edging.
Checking the box
Because WQ58383 and WQ58384 read alike apart from the rocker panel line, check the label shows SKU WQ58384 and UPC 691821469666 on arrival. Hold each piece up near its opening against the photos before peeling anything, paying attention to the lower ends near the rocker panels. If the pieces don't match your Expedition, keep every liner on and phone 877-752-3811. Have painter's tape, a plastic scraper, both cleaners, a lamp and a step ready for the day itself.
After fitting, walk round the Expedition and compare each arch with the photos from a few steps back before its first wash.
Expedition (with rocker panels, not MAX) set WQ58384, UPC 691821469666. Call 877-752-3811.
WQ58384 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ58384 |
| UPC | 691821469666 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.25" |
| Coverage / notes | Does not fit the "MAX" version |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2025 Ford Expedition |
Fitment: WQ58384
| Vehicle | Years | Body style |
|---|---|---|
| Ford Expedition | 2018-2025 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2025 Ford Expedition
- DH58383: 1-piece Tailgate Handle Accent Trim
- RD58383: 1-piece Rear Deck Accent
- BI58383: 1-piece Rear Bumper Trim Accent
- WQ58383: 6-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ58384 Wheel Well Accent Trim
Which Expedition is WQ58384 for?
The 2018-2025 model equipped WITH Rocker Panels, not the MAX.
How wide is it?
1.25".
How many pieces?
Six, with black rubber gasket edging.
What if mine has no rocker panels?
WQ58383 is listed for that model.
