Product Description
1990-1998 Chevy S-10 Blazer 4-Door Stainless Door Handle Accent Trim, 4 Pieces (DH30193)
The 4-door Chevrolet S-10 Blazer is the target for DH30193. This four-piece door handle accent trim set is cut from polished 26-gauge 304 stainless steel, made in the USA, and QAA lists it for the 1990-1998 S-10 Blazer 4-door SUV. One accent goes at each of the four door handles.
Specifications in brief
- QAA files these four S-10 Blazer pieces as door handle accent trim
- Pieces: four
- Material: type 304 stainless steel, 26 gauge, polished
- Made in the USA
- Mount: 3M automotive-grade acrylic foam tape, directly over the existing surface
- UPC: in the Specs tab
4-door only
The single fitment row is the S-10 Blazer 4-door SUV for model years 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, and 1998. If you have a 2-door Blazer, this set is not listed for it; the piece count is matched to four doors. The Fitment tab shows the row exactly as QAA has it.
Accent trim on a classic SUV
Accent trim puts polished stainless at the S-10 Blazer's handle area and leaves the factory handle in place. For an SUV of this age, that means you can brighten the doors without hunting for replacement handles or removing anything.
Why 304 stainless
Type 304 is one of the most widely used stainless grades. At 26 gauge it is thin and easy to keep tight against the body, and QAA's polished finish gives it a mirror-like shine.
Getting a good bond
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. The key to a good bond on an older paint finish is cleaning. Start by washing, then go over each handle area with a degreaser to lift old wax and protectant. Let it dry fully. Hold each accent in place with the liner on so you can check its position, then peel and press firmly for a few seconds. If it is cold, work in a garage. The Installation tab has full guidance.
A detail for owners who care
People who keep an S-10 Blazer from these years tend to pay attention to small details. Polished handle accents freshen the look of the doors and make the SUV look cared for, all with a set that installs in one short session.
No companion parts listed
The Fitment tab shows DH30193 alone, since no companion QAA parts are linked to this SKU. If you are looking for more stainless for your Blazer, call and we will check what QAA catalogs.
Before you order
Count the doors: this set is for the four-door Blazer. Then confirm the year falls between 1990 and 1998. If both are true, DH30193 is the set QAA lists for your SUV. Any question about the trim or the body, call before you order.
After install
Wait a bit before washing so the tape settles. From then on, wash and dry the trim with the rest of the vehicle, and wipe off fingerprints as needed.
Questions
Call Quality Automotive Trims at 877-752-3811 and mention DH30193.
DH30193 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DH30193 |
| UPC | 691821301621 |
| Part type | Door Handle Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1998 Chevrolet S-10 Blazer |
Fitment: DH30193
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet S-10 Blazer | 1990-1998 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Door Handle Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DH30193 Door Handle Accent Trim
Which Blazer does DH30193 fit?
The 1990-1998 Chevrolet S-10 Blazer 4-door SUV.
Does it fit the 2-door Blazer?
It is listed for the 4-door only.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
How does it attach?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
Four, one per door.
