Product Description
Ford Econoline E-150 and E-250 Cargo Van Stainless Door Handle Accents, 4 Pieces, 1993-2002 (DH35318)
Cargo vans have more handle positions than most vehicles, and DH35318 is laid out for them. QAA's note on this four-piece stainless door handle accent set reads "Two front, one slider, one rear." It is listed for the 1993-2002 Ford E-150 Econoline and E-250 Econoline cargo vans with a slider door, and it is made in the USA from polished 26-gauge 304 stainless steel.
Where each piece goes
- Two pieces for the front doors, per the listing
- One piece: the sliding side door handle
- One piece: the rear door handle
QAA's note spells out the layout, so you know exactly which handle each piece is meant for. The product photos show each shape.
Fitment rows
Ford E-150 Econoline, 1993-2002, and E-250 Econoline, 1993-2002, each ten model years. Both rows describe a 3-door cargo van with a slider door. The second row's data lists only "E-250 Econoline" without the make, but it is the same Ford van family. If your van has swing-out side doors instead of a slider, or is another series, call us before ordering. The Fitment tab shows both rows exactly as QAA catalogs them.
Material
Type 304 stainless steel at 26 gauge, polished to a bright finish and made in the USA. Type 304 is a widely used grade, and the thin sheet lets each accent sit close to the van's body.
Install on a work van
Each accent attaches with 3M automotive-grade acrylic foam tape and installs directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Work vans collect grime around the handles, especially the rear and slider, so clean thoroughly: wash, degrease, and dry. Dry-fit each piece with the liner on, matching it to its handle, then peel and press firmly for a few seconds. The Installation tab gives the full steps.
Why it suits fleet and personal vans
On an Econoline that carries a business name, stainless handle accents sharpen the look without affecting how the handles work. For a personal conversion or camper build on an Econoline, they are an easy finishing touch. Either way, the original handles stay in place and work as before.
Covering the whole van
Because the set includes the slider and rear handles, the accents match on every side of the van, not just the front doors.
Order of work
Pick any door on the Econoline to begin; the first cover is where you get a feel for the fit. Then carry on around the van, slider and rear included, one door at a time. The rear handle area gathers the most road dirt, so give it a second degreaser pass and let it dry fully before pressing the piece on.
No companion parts listed
No companion QAA parts are linked to this SKU, so the Fitment tab shows DH35318 alone. Call to ask about other trim for your Econoline.
Questions
If the Econoline set leaves a question, call 877-752-3811 and mention DH35318; the UPC is under Specs.
DH35318 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DH35318 |
| UPC | 691821613618 |
| Part type | Door Handle Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Two front, one slider, one rear |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-2002 Ford E-150 Econoline and 1993-2002 E-250 Econoline |
Fitment: DH35318
| Vehicle | Years | Body style |
|---|---|---|
| Ford E-150 Econoline | 1993-2002 | 3-door, Cargo Van, w/ slider door E-150 Econoline, E-250 Econoline |
| E-250 Econoline | 1993-2002 | 3-door, Cargo Van, w/ slider door E-150 Econoline, E-250 Econoline |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Door Handle Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DH35318 Door Handle Accent Trim
Which handles does DH35318 cover?
Per QAA's note: two front, one slider, and one rear.
Which vans does it fit?
The 1993-2002 Ford E-150 Econoline and E-250 Econoline cargo vans with a slider door.
How many pieces?
Four.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
How does it attach?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
