Product Description
Ford E-150 Econoline Cargo Van 1993-2002 with Sliding Door: 10-Piece Lower Rocker Kit, 6" (TH35318)
TH35318 is a ten-piece polished stainless steel Lower Kit for the Ford Econoline cargo van, 1993-2002. The fitment row is written "3-door, Cargo Van w/ Sliding Door E-150 Econoline," and the model is listed as the E-150 Econoline, while the title says simply "Ford Econoline." The kit is 6" wide and "Spans from the bottom of the door UP to the specified width."
Sliding door, three doors
The tag is specific: a three-door cargo van with a sliding door. QAA also catalogs an eleven-piece Econoline kit tagged for a four-door cargo van with swinging doors, but it isn't linked to this listing. If your van has swinging side doors, this record doesn't describe it; call 877-752-3811.
E-150 in the fitment
Only the E-150 Econoline is named in the fitment. If your van carries a different badge, phone us before ordering rather than assuming it carries over.
Six inches up from the bottom
As a Lower Kit, the steel's bottom edge sits at the bottom of the door and the band rises 6". Measure 6" up from the door bottom at several points and run painter's tape along the marks to see where the top edge will fall.
Ten pieces on a van side
The record doesn't give positions. Lay the pieces out, compare with the photos, and number the liners. The record doesn't say how the ten pieces are laid out on the van.
Construction
Built for the 1993-2002 E-150 Econoline cargo van, ten 6" strips of USA-made polished 26 gauge 304 stainless steel rise from the door bottom on 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime with no harm to the van.
Run the slider first
Before peeling the liner on any piece near the sliding door, tape it in place and run the door through its full travel. It must clear the track and the body as the door opens and closes. If anything rubs, stop and call.
Prep for a working van
The bottom edges of a van's doors and panels collect grime and chips. Wash thoroughly, dry, and wipe the band with isopropyl alcohol until clean. Repair any rust or flaking paint along the bottom edge before installing.
Install
Line up each piece's lower edge with the bottom of the door or panel. Peel a few inches, press, then continue along with the liner coming away. Finish with firm pressure.
Supplies
Soap, alcohol, lint-free cloths, painter's tape, a marker, a tape measure, a plastic tool and a helper.
What to send when you call
The badge on your van, its year, how its doors open, and a photo of the van in profile. Those answer the questions this record leaves open.
Matching
Where doors correspond, measure positions and keep them consistent.
Care
A day before washing. Then mild soap and soft cloths.
Econoline E-150 kit TH35318 carries UPC 691821355365; reach us at 877-752-3811.
TH35318 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH35318 |
| UPC | 691821355365 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6" |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-2002 Ford E-150 Econoline |
Fitment: TH35318
| Vehicle | Years | Body style |
|---|---|---|
| Ford E-150 Econoline | 1993-2002 | 3-door, Cargo Van w/ Sliding Door E-150 Econoline |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH35318 Rocker Panel Trim, Lower Kit
Does TH35318 fit an Econoline with swinging side doors?
It's tagged for a three-door cargo van with a sliding door. Call 877-752-3811 about other layouts.
How tall is it?
6", measured up from the bottom of the door.
Which years?
1993-2002.
How many pieces?
Ten.
