Product Description
1993-1997 Ford Ranger XLT Short Bed, No Flares: Ten-Piece 6" Stainless Rocker Kit (TH33323)
TH33323 is listed for the 1993-1997 Ford Ranger XLT short bed without flares: "Pickup Truck, XLT, Short Bed, NO Flares." The kit is ten pieces of polished stainless steel, 6" wide, a Full Kit with the span note "Spans from the bottom of the molding to the bottom of the door." Its width bullet also reads "QAA Molding," a note the record never defines.
Short bed, no flares: two options
The linked TH33325 shares this exact tag but is 8.5" tall with "With Trim Crease" instead of the QAA Molding note. So one truck description has two kits of different height in the data. The record doesn't say which bodywork each one suits. Measure the band on your own doors and call 877-752-3811; we'll go through the photos of both with you.
The rest of the 1993-1997 group
TH33322 is the short bed with flares and molding, TH33327 the long bed with flares, and TH33328 the long bed without. All are 6", ten pieces.
Cab type isn't listed
This group's fitment doesn't name a cab. If you know yours, mention it when you call.
On "QAA Molding"
We can't tell from the data whether this means a molding your truck must already have or one QAA provides. Nothing in the record says a molding is in the box. Ask before ordering.
What the record lists
- Ford Ranger XLT, 1993-1997, short bed, NO Flares
- Full Kit, ten pieces, 6" tall
- Made in the USA of polished 304 stainless, 26 gauge, high grade
- Sits over the Ranger's surface on 3M automotive-grade acrylic foam tape
According to QAA, the tape fixing the Ranger XLT short bed pieces will hold for a lifetime and cause no damage to the truck.
Taking the measurement
From the line where the top of the trim would sit down to the bottom of the door, at the front and rear. Six inches points one way, eight and a half the other; anything else, call.
Ten pieces to place
Positions aren't in the record. Lay out the pieces and match them to the photos, then label.
Clean surface
Soap, rinse, dry; then isopropyl alcohol until a clean cloth stays clean. Check older paint with a painter's tape pull.
Mounting
Test-fit with the liner on. Peel a little, align, press firmly, and continue, then close the door gently and listen.
Plain wheel openings
With no flares, make sure the outermost pieces sit flat all the way to their ends during the dry-fit.
Lining up the pieces
Measure positions from the door gap and keep them consistent.
Supplies
For this Ranger kit: car soap, isopropyl alcohol, cloths, painter's tape, a tape measure and a plastic trim tool.
Before calling
Have the year, bed length, whether it has molding, and your door measurement ready. A photo of the lower door is the fastest way for us to compare it with both short bed kits.
Conditions
Mild, dry weather; a day's wait before washing; non-abrasive polish later.
1993-1997 Ranger short-bed kit TH33323, UPC 691821637508. Quality Automotive Trims, 877-752-3811.
TH33323 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33323 |
| UPC | 691821637508 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6" |
| Coverage / notes | QAA Molding; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1997 Ford Ranger |
Fitment: TH33323
| Vehicle | Years | Body style |
|---|---|---|
| Ford Ranger | 1993-1997 | Pickup Truck, XLT, Short Bed, NO Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1993-1997 Ford Ranger
- TH33322: 10-piece Rocker Panel Trim, Full Kit
- TH33325: 10-piece Rocker Panel Trim, Full Kit
- TH33327: 10-piece Rocker Panel Trim, Full Kit
- TH33328: 10-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33323 Rocker Panel Trim, Full Kit
TH33323 or TH33325?
Both are tagged short bed NO Flares. TH33323 is 6" with a QAA Molding note; TH33325 is 8.5" With Trim Crease. Call 877-752-3811 to choose.
Does it fit a Ranger with flares?
It's tagged NO Flares. TH33322 is the short bed flares kit.
Which years?
1993-1997.
How many pieces?
Ten.
