Product Description
Ford Ranger XLT Long Bed Without Flares, 1993-1997: 6" Full Rocker Kit, Ten Pieces (TH33328)
TH33328 covers the 1993-1997 Ford Ranger XLT long bed with no flares. The record's tag is "Pickup Truck, XLT, Long Bed, NO Flares." Ten pieces of polished stainless steel at 6" make up the Full Kit, which "Spans from the bottom of the molding to the bottom of the door." The width bullet also says "QAA Molding."
Quick check: is this your truck?
- Ford Ranger XLT, model year 1993 to 1997
- Long bed
- No flares around the wheel openings
All three yes? This is the record that describes it. If your long bed has flares, the linked TH33327 is tagged for that. If your bed is short, look at TH33322, TH33323 or TH33325. Anything uncertain, phone 877-752-3811.
What the record doesn't tell us
It doesn't name a cab type for this group, and it doesn't explain the "QAA Molding" note: whether the truck needs molding already, or whether QAA supplies one. It doesn't say any molding is included. Those two questions are worth a call before ordering.
Construction and mounting
The 1993-1997 Ranger XLT long bed without flares takes ten 6" pieces of USA-made polished 26 gauge 304 stainless, set from molding to door bottom with 3M automotive-grade acrylic foam tape. According to QAA, that tape will hold for a lifetime with no harm to the pickup.
Six inches
That's the listed span from the molding to the door bottom. Measure front and rear of the door on your Ranger and compare.
Laying out
The ten pieces aren't assigned positions in the record. Sort them by shape, compare them with the photos, and write the position on each liner.
Preparing older paint
On a Ranger from these years, check the paint low on the doors for fading or chalk. Wash, then wipe with isopropyl alcohol; if the cloth picks up color, polish lightly and wipe again. Press and pull painter's tape to check adhesion.
On it goes
Dry-fit each piece with the liner on, top edge at the molding line. Peel a few inches, press, then continue while drawing the liner out. A firm cloth pass finishes it.
Clean wheel openings
With no flares, the outer ends sit against plain body. Check they lie flat all the way.
Doors
Open and close each door after its piece.
Ranger readings
Measure the Ranger positions and keep them consistent.
Supplies
Soap, isopropyl alcohol, cloths, painter's tape, a tape measure, a plastic tool, light polish if needed.
Molding line
Every piece's top edge follows the molding line. Press along it on each door and correct loose or wavy sections before cleaning, or the steel will copy the fault.
If you're between kits
Not sure whether your truck counts as long bed, or whether what's around the wheels is a flare? Send a photo of the full side and one wheel opening. It's quicker for both of us than a return.
Install day
Mild and dry. A day before washing.
The 6-inch Ranger set TH33328 has UPC 691821672271; call 877-752-3811 about fit.
TH33328 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33328 |
| UPC | 691821672271 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6" |
| Coverage / notes | QAA Molding; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1997 Ford Ranger |
Fitment: TH33328
| Vehicle | Years | Body style |
|---|---|---|
| Ford Ranger | 1993-1997 | Pickup Truck, XLT, Long Bed, NO Flares |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1993-1997 Ford Ranger
- TH33322: 10-piece Rocker Panel Trim, Full Kit
- TH33323: 10-piece Rocker Panel Trim, Full Kit
- TH33325: 10-piece Rocker Panel Trim, Full Kit
- TH33327: 10-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33328 Rocker Panel Trim, Full Kit
Does TH33328 fit a Ranger with flares?
It's tagged NO Flares. TH33327 is the long bed flares kit.
Is molding included?
The record doesn't say it is. Call 877-752-3811.
Which years?
1993-1997.
How many pieces?
Ten.
