Product Description
Ford Ranger XLT Short Bed with Flares & Molding, 1993-1997: 6" Ten-Piece Rocker Kit (TH33322)
TH33322 belongs to the shorter-year Ranger group: 1993-1997, tagged "Pickup Truck, XLT, Short Bed, w/ Flares, w/ molding." Unlike the longer-span Ranger kits QAA catalogs, this group's tags don't say Extra Cab. The kit is ten pieces of polished stainless steel at 6", a Full Kit that "Spans from the bottom of the molding to the bottom of the door," with the width note "QAA Molding."
Two molding mentions
The fitment says "w/ molding" and the width bullet says "QAA Molding." The record doesn't explain whether those refer to the same thing, whether the truck must already have molding, or whether QAA supplies it. Nothing in the record says molding comes in the box. Please call 877-752-3811 before ordering so we can go over it with you.
No cab type listed
The 1993-1997 tags omit the cab type, while the longer-span group is tagged Extra Cab. The data doesn't say which cab this group is for. Tell us your cab when you call.
Linked kits in this group
- TH33323: 6", short bed, NO Flares
- TH33325: 8.5", short bed, NO Flares, With Trim Crease
- TH33327: 6", long bed, w/ Flares
- TH33328: 6", long bed, NO Flares
TH33322 is the short bed kit tagged with flares.
Material
Built for the 1993-1997 Ranger XLT short bed with flares and molding, ten 6" pieces of USA-made polished 26 gauge 304 stainless go from molding to door bottom on 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime with no harm to the pickup.
Flare ends
Dry-fit the pieces nearest the wheel openings first and confirm they stop where the photos show, sitting flat without pressing on the flares.
Layout
The ten pieces' positions aren't listed. Lay them out, compare with the photos, label the liners.
Paint and prep
Wash, dry, isopropyl alcohol across the band. Test older paint with painter's tape.
Mounting
Top edge at the molding, liner on, check, then peel and press. Close each door gently.
Measuring each position
Record each piece's position, measured from the door gap and wheel openings, and keep the others consistent.
What to bring to the call
Your model year, cab type, bed length, whether flares and side molding are fitted, and a measurement of the lower door from the bottom edge up. With those, we can explain how the molding notes apply and whether this kit or one of its linked twins suits your Ranger.
Supplies
Soap and a bucket, isopropyl alcohol, a stack of lint-free cloths, painter's tape and a marker, a tape measure, a plastic tool for residue near the flares.
If something doesn't fit
Stop before peeling. A piece that won't sit flat or reaches past the door gap is a reason to call with a photo, not to bend the steel.
Timing
A dry, mild day, and a day before washing.
Questions about the molding notes? SKU TH33322, UPC 691821488513. Quality Automotive Trims, 877-752-3811.
TH33322 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33322 |
| UPC | 691821488513 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6" |
| Coverage / notes | QAA Molding; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1997 Ford Ranger |
Fitment: TH33322
| Vehicle | Years | Body style |
|---|---|---|
| Ford Ranger | 1993-1997 | Pickup Truck, XLT, Short Bed, w/ Flares, w/ molding |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1993-1997 Ford Ranger
- TH33323: 10-piece Rocker Panel Trim, Full Kit
- TH33325: 10-piece Rocker Panel Trim, Full Kit
- TH33327: 10-piece Rocker Panel Trim, Full Kit
- TH33328: 10-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33322 Rocker Panel Trim, Full Kit
Does TH33322 fit a newer Ranger?
This group is listed for 1993-1997. Call 877-752-3811 about newer trucks.
Is molding included?
The record doesn't say it is. Call before ordering.
Does it fit a long bed?
No. TH33327 and TH33328 are the long bed kits.
How tall?
6".
