Product Description
Crown Victoria Door Pull Stainless Accents, 4 Pieces, Pulls Only, 1998-2009 (DH38361)
Sometimes the simplest kit is the right one. DH38361 is a four-piece stainless door handle accent set for the 1998-2009 Ford Crown Victoria four-door sedan, and QAA's note keeps it short: "Pulls only." One accent for the pull on each of the four doors, nothing else. The pieces are polished 26-gauge 304 stainless steel, made in the USA.
Pulls only, explained
The note tells you the kit is focused on the door pulls themselves. If you want a light touch of stainless right where your hand goes, this is the set. QAA also lists a larger nine-piece door handle set for the same Crown Victoria, DH38360. Its catalog entry has no note on the additional pieces, so if you're torn between the two, compare the photos or call us to choose.
Fitment
- Make and model: Ford Crown Victoria
- Years: 1998 to 2009, twelve model years
- Body: 4-door sedan
That one row is the full listing, and the Fitment tab displays it along with the nine-piece sibling.
What it is made of
The accents are cut from 304 stainless steel, a widely used grade, at 26 gauge. That thin sheet lets each piece sit flat and close to the pull, and the polished surface gives a bright, clean shine. They are made in the USA.
A quick install
With just four pieces, this is a short job. Each accent mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Clean each pull area with soap and water, then wipe it with a degreaser to remove old wax. Let it dry. Hold each accent in position with the liner on to check alignment, peel the liner, and press firmly for several seconds. Work around the Crown Victoria one door at a time, finishing each before the next. The Installation tab goes into more detail.
Who picks this kit
If you'd like to fit stainless in stages, the door pulls are a modest place to start, since every piece goes on with tape and needs no tools beyond a cloth and cleaner. The original handles stay untouched and work as before.
Adding more later
Since it goes on over the existing surface, more trim can follow later without undoing this kit. Call us if you want to see what else QAA lists for your Crown Victoria.
Is it the right budget pick?
Fewer pieces means a smaller kit and a faster job. If you are not sure you want polished stainless all over the doors, the pulls are a good test of how you like the look. Plenty of owners find that a small, bright accent at the pull is all the car needs.
Aftercare
Give the tape a little time before the first wash. Then just wash and dry as usual.
Questions
Quality Automotive Trims is at 877-752-3811. Ask about DH38361; the UPC is in the Specs tab.
DH38361 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DH38361 |
| UPC | 691821694136 |
| Part type | Door Handle Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Pulls only |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1998-2009 Ford Crown Victoria |
Fitment: DH38361
| Vehicle | Years | Body style |
|---|---|---|
| Ford Crown Victoria | 1998-2009 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1998-2009 Ford Crown Victoria
- DH38360: 9-piece Door Handle Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Door Handle Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DH38361 Door Handle Accent Trim
What does "pulls only" mean?
QAA's note says this four-piece kit is for the door pulls only, one piece per door.
Which car does DH38361 fit?
The 1998-2009 Ford Crown Victoria 4-door sedan.
Is there a bigger set?
Yes. DH38360 is a nine-piece door handle set for the same car.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
How does it attach?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
