Product Description
Eight-Piece 9.25" Full Rocker Kit for the 1992-1997 Ford Crown Victoria Sedan (TH32364)
TH32364 fills the whole band under the molding on a 1992-1997 Ford Crown Victoria sedan. It's eight pieces of polished stainless steel at 9.25", a Full Kit with the note "Spans from the bottom of the molding to the bottom of the door." That's nine and a quarter inches of steel from top to bottom.
Deep coverage vs full length
Two Crown Victoria rocker kits are linked to each other. This one is the tall version: 9.25", molding to door bottom, eight pieces, with no note about extending past the doors. TH32359 is the long version: twelve pieces at 4.125", hung from the molding and listed as full length, wheel well to bumper front and rear. Decide whether you want more height on the doors or more length along the car, and pick accordingly. Calling 877-752-3811 is the way to discuss anything in between.
Measure first
On a front door and a rear door, measure from the underside of the molding to the bottom edge. Nine and a quarter inches is what the record lists. Readings far from that mean a call before you order.
Spec sheet
- For the 1992-1997 Crown Victoria four-door sedan
- A Full Kit of eight pieces
- 9.25" width
- Crown Victoria steel: high-quality polished 304, 26 gauge
- Crown Victoria trim produced in the USA
- Attaches over the Crown Victoria's surface with 3M automotive-grade acrylic foam tape
On the Crown Victoria, QAA states the tape will hold for a lifetime and leaves the sedan's surface undamaged.
Big panels, smooth paint
Panels this tall reflect a lot, so every ripple or bump beneath shows. Wash, dry, then go over the band with isopropyl alcohol several times. Run your palm across it to feel for grit or old tar and remove anything you find. Repair chips and flaking first.
Positioning
The record doesn't assign the eight pieces to doors. Use the photos to match each to its spot, and label the liners.
Air out, not in
With a tall piece, start by setting the top edge under the molding along a short length. Then work the liner out while pressing from the middle of the piece toward its edges, so air escapes rather than gets trapped. A soft cloth helps spread pressure evenly.
Doors and clearance
Swing each door through its full travel once its panel is on and watch the bottom edge.
Pillar posts
The linked PP32361 is an eight-piece pillar post set for the same Crown Victoria sedan; see that listing for its details.
Two people help
A helper holding the far end keeps a nine-inch panel square while you peel and press.
Matching the sides
Measure each piece's position relative to the door gaps and keep the numbers consistent.
Weather and upkeep
Mild and dry for the install. A day's rest before washing. Then gentle soap and an occasional non-abrasive polish; soft cloths avoid swirl marks on wide polished surfaces.
Questions about fit? Quality Automotive Trims, 877-752-3811. SKU TH32364, UPC 691821358892.
TH32364 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH32364 |
| UPC | 691821358892 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 9.25" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1997 Ford Crown Victoria |
Fitment: TH32364
| Vehicle | Years | Body style |
|---|---|---|
| Ford Crown Victoria | 1992-1997 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1992-1997 Ford Crown Victoria
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH32364 Rocker Panel Trim, Full Kit
How tall is TH32364?
9.25", from the bottom of the molding to the bottom of the door.
Does it cover past the doors?
The record has no full-length note. TH32359 is the full-length Upper Kit.
How many pieces?
Eight.
Which years?
1992-1997 Crown Victoria sedan.
