Product Description
Ford Expedition and Lincoln Navigator 2015-2017 Stainless Gas Door Trim (GC55655)
The title names the 2015-2017 Ford Expedition and the Lincoln Navigator, and the Fitment tab lists both for those three years, 2015 through 2017, as 4-door SUVs. So whichever of the two you own, if it's from those years, GC55655 is listed for it. Have an Expedition or Navigator question? We'll talk it through on 877-752-3811.
A single polished piece of 26-gauge 304 stainless, made in the USA, covers the Expedition's fuel door. The Expedition overlay attaches with 3M automotive-grade acrylic foam tape. It is not a replacement cap and not a replacement part. You MUST have the existing gas door to install this piece. It bonds onto the face of the SUV's existing fuel door.
Two companions are cross-listed. RD55655 is a one-piece rear deck accent at 2.188 inches, sold separately on its own listing. PP55384 is a six-piece pillar post set. Its part number doesn't follow this listing's number pattern the way RD55655 does, which is a little unusual, so it's worth confirming it on its own listing or by phone before ordering. The sibling lines show only "4-door, SUV," so they don't say whether each part fits the Expedition, the Navigator or both.
A short fitment window like this one makes the year check important. Match your model year to that span. If it falls outside 2015-2017, call before ordering. Also confirm the gas door itself is on the vehicle, undamaged, and opening and closing normally, since the trim relies on it.
Fitting the gas door trim requires no drilling, because it installs directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. As with any tape-mounted part, the paint underneath matters most. Inspect the fuel door for dull, peeling or blistering clear coat and chips at the edge, and repair any of it before starting. The door should close flush and latch firmly.
To install, clean the door with soap and water, rinse, dry, and degrease until a fresh cloth stays clean. Test the placement with the liner on, adjusting the trim on the closed door until the paint border is the same width on every side. A helper standing back can confirm it looks centered. Mark the position with painter's tape on the body. Peel the liner, line the trim up with the marks, set it down without sliding, and press firmly everywhere. Give it a second firm press after a minute. Open the door slowly to make sure it clears. The Installation tab spells out each step.
Polished 304 stainless gives a bright, reflective look, and the 26 gauge sheet keeps it thin on the door. Install on a mild, dry day and leave the tape to set overnight. Clean with mild soap and a soft cloth, and wipe away fuel drips.
For the Expedition gas door trim, phone 877-752-3811 and mention GC55655; you'll see the UPC on Specs.
GC55655 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC55655 |
| UPC | 691821368020 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2015-2017 Ford Expedition and 2015-2017 Lincoln Navigator |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC55655
| Vehicle | Years | Body style |
|---|---|---|
| Ford Expedition | 2015-2017 | 4-door, SUV |
| Lincoln Navigator | 2015-2017 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Ford Expedition
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC55655 Gas Door Cover Trim
Is GC55655 a replacement gas door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
Does it fit the Lincoln Navigator?
Yes. The fitment lists the 2015-2017 Lincoln Navigator as well as the 2015-2017 Ford Expedition, 4-door SUV.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
