Product Description
Lincoln Navigator 2015-2017 License Bar, Just Under the Rear Window (LB55655)
The catalog places LB55655 precisely: Just under the rear window. That's the defining note on this one-piece polished stainless bar for the Lincoln Navigator 4-door SUV, model years 2015 through 2017. It is cataloged as License Bar, Above plate accent Trim, so it sits above the plate area, and the note tells you its position is directly below the glass.
Specs
The Navigator bar is a single mirror-polished strip of 26-gauge 304 stainless, made in the USA. 3M automotive-grade acrylic foam tape holds it to the liftgate's existing surface, so no holes are needed; QAA states that bond will hold for a lifetime and won't harm the Lincoln's finish or surface.
Placement
Because the bar goes just under the rear window, the bottom edge of the glass is your reference line. During the dry fit, keep the bar parallel to that edge and centered side to side. The product photos show the exact position and shape, and they should match what you see on your liftgate. If they don't, call Quality Automotive Trims at 877-752-3811 and mention LB55655 before ordering.
Install
Clean the panel below the glass with soap and water, dry, then wipe with rubbing alcohol. Glass cleaner overspray often lands here, so a thorough alcohol wipe matters. Hold the bar in place, liner on, and check from behind the vehicle. Mark both ends with painter's tape. Peel, line up, and press firmly along the full length. Remove the marks and press again. Close the liftgate gently for the first day. Temperature notes are on the Installation tab.
The "L" question on other parts
Several parts on this Navigator list carry a note about the "L" version, and those notes are worth reading carefully, because they don't all say the same thing. TH55655, a four-piece upper rocker kit at 5" with top and bottom crease, does not fit the "L" version. TH55656, a four-piece kit at 3.375" that goes actually on the retractable step bar, does not fit the "L" version either, and WQ55655, a twelve-piece wheel well accent at 1.5", carries the same exclusion. TH55658, also four pieces at 3.375" on the step bar, does fit the "L" version. LB55655's own fitment row has no "L" note.
Other parts
SG55655 is a one-piece front grille accent noted Logo Surround. BI55655 is a four-piece rear bumper insert set. LP55655 is a one-piece license plate bezel. TH55659 is named by number only. Check each listing's photos for finish.
Why a position note matters
Most license bars are placed by eye relative to the plate. A note that ties this one to the rear window gives you a fixed line to follow, which makes it easier to get level on a tall liftgate. If the window edge on your vehicle doesn't look like the photos, that is the moment to stop and call rather than improvise.
Paint check
Look for chips or residue below the glass and clear them before installing.
Care
Mild soap and water, a soft towel, no abrasives.
LB55655 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB55655 |
| UPC | 691821520954 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Just under the rear window |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2015-2017 Lincoln Navigator |
Fitment: LB55655
| Vehicle | Years | Body style |
|---|---|---|
| Lincoln Navigator | 2015-2017 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2015-2017 Lincoln Navigator
- SG55655: 1-piece Front Grille Accent Trim
- BI55655: 4-piece Rear Bumper Trim Accent
- LP55655: 1-piece License Plate Bezel
- TH55655: 4-piece Rocker Panel Trim, Upper Kit
- TH55656: 4-piece Rocker Panel Trim, On the rocker
- WQ55655: 12-piece Wheel Well Accent Trim
- TH55658: 4-piece Rocker Panel Trim, On the rocker
- TH55659: 4-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB55655 License Bar, Above plate accent Trim
Where does LB55655 go?
The catalog notes Just under the rear window.
Which Navigator years does it fit?
2015 through 2017, 4-door SUV.
Does it fit the "L" version?
Its fitment row has no "L" restriction. Call 877-752-3811 to confirm for your vehicle.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How wide is it?
No width is listed.
