Product Description
Jaguar X-Type 2002-2009 Stainless License Plate Bezel, 6.375" (LP25094)
LP25094 is a polished stainless License Plate Bezel for the Jaguar X-Type 4-door sedan. The fitment row covers eight model years, 2002 through 2009, sedan only, with no trim exclusions. The listing also includes a measurement: the listing gives a width of 6.375".
About that 6.375" figure
It's useful, but it needs a caveat. The catalog states 6.375" Width without saying which dimension of the bezel it describes, whether that's the overall span, the height of the frame, or something else. We've flagged it so the listing can be clarified. In the meantime, don't take a tape measure to the car and rule the part in or out on that number alone. Use the product photos to see the outline, compare them with the area around your plate, and if you want the measurement explained, call Quality Automotive Trims at 877-752-3811 and ask about LP25094.
Construction
One piece, made in the USA from 26-gauge 304 stainless steel with a mirror polish. No cutouts are mentioned in the notes, so check the photos for any openings around a lock, emblem or light near the plate.
Installation
The X-Type bezel attaches directly over the existing surface with 3M automotive-grade acrylic foam tape; there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. With these model years reaching back to 2002, start by examining the paint around the plate in daylight. Touch up chips and repair clear coat that's lifting before anything is taped to it, and clear away residue from old frames or stickers. Remove the plate, wash and rinse the area, let it dry, and wipe with rubbing alcohol. Hold the bezel in place with the liner on and check from behind the car that it looks centered. Mark the position with painter's tape, peel, press firmly all around the frame, and press once more. Work in the temperature range given on the Installation tab.
Pillar kits on the sheet
Two other X-Type parts are cross-listed: PP22093, a four-piece pillar post kit, and PP22094, a six-piece kit, both tagged for the 4-door sedan. Their numbers follow a different series from this bezel's, so we've asked for the link to be verified; confirm by phone if you're ordering them together. Check each listing for its finish.
A contained project
Because the bezel is a single piece in one location, it's a short job with nothing to align except the frame itself. It also shows how polished stainless looks against your X-Type's paint before you decide on the pillar kits, and it can be done in a garage or driveway with basic supplies.
Year and frame check
An X-Type sedan between 2002 and 2009 is what your records need to show. If you use a frame around the plate, refit it during the dry fit to make sure it doesn't overlap the bezel.
Care
Mild soap, plain water and a soft towel are all the polish needs. Keep scouring pads and gritty polishes off it.
LP25094 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP25094 |
| UPC | 691821410330 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.375" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2002-2009 Jaguar X-Type |
Fitment: LP25094
| Vehicle | Years | Body style |
|---|---|---|
| Jaguar X-Type | 2002-2009 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2002-2009 Jaguar X-Type
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP25094 License Plate Bezel
Which Jaguar does LP25094 fit?
The 2002-2009 Jaguar X-Type 4-door sedan.
What does the 6.375" width measure?
The catalog doesn't say which dimension it is. See the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One bezel.
Are there cutouts?
None are noted. Check the photos.
